Document & Email Templates
Building the reusable emails and text messages that go out with invoices, estimates, campaigns and automations — blocks, merge tags, buttons, previews and test sends.
On this page
Where templates live
In the Landscapt sidebar, under Administration, click Documents. The list shows each template's title, type, description and last-modified date; click a title to open the editor, and use Add Document to start a new one. You need the document template permission to see the page. Pick a template when you send an invoice, estimate or bulk email, or in an automation's email step, and its content fills the message for you to review before it goes out.
Template types
The type decides which merge tags are offered in the editor.
| Type | Used for |
|---|---|
| Client | General emails to a client, including the emails automations send. Client documents are also used as an Estimate Document's Estimate Email and Confirmation Email, so they offer the estimate merge tags and a “View proposal” button link; those only fill in when the email is sent from an estimate. |
| Estimate | The proposal layout the client sees: your header, greeting, the Estimate Grid and your terms. Adds the estimate merge tags and the estimate settings (see below). |
| Invoice Email | The email that goes with an invoice. Adds the invoice merge tags, including the payment link. |
| Marketing | Campaign emails. |
| Chemical | Chemical application notices. Adds the products and care-instruction tags. |
| Text Message | Plain SMS text. Only Paragraph blocks are available, and there is no subject line. |
Blocks
A template is a stack of blocks. Add one from the panel on the right, then move it up or down or delete it with the small controls that appear when you hover it. Click a block to make it the active one.
| Block | What it is |
|---|---|
| Header | A large line of rich text, for a greeting or title. |
| Paragraph | Body text with bold, italic, underline, lists, alignment and images. |
| List | A bulleted or numbered list. |
| Line Items Table | A placeholder. The real table of line items is filled in automatically from the invoice or estimate when the email is sent. |
| Image | An uploaded picture, such as your logo. |
| Divider / Spacer | A thin line, or empty space, between blocks. |
| Signature | Rich text for the sign-off, usually your contact details as merge tags. |
| Button | A coloured button with your own label that links somewhere (see below). |
| Columns | Two or three side-by-side columns. Each column holds rich text, images and merge tags. |
| Estimate Grid | Estimate documents only. A dynamic tile that shows the estimate's line items, quantities and prices wherever you place it. One per document. |
Click Save Changes in the top bar to keep your edits; the button reads Saved when there is nothing new.
Estimate documents
An Estimate document is the proposal itself, built in the same editor as every other template. It works together with two Client-type documents, so an estimate setup is three documents:
- The Estimate document is the layout the client sees on the online proposal and in the PDF.
- The Estimate Email is a Client-type document that carries the estimate to the client. Include an
[estimatelink]tag or a button that links to[estimatelink]so the client can open and accept the proposal. - The Estimate Confirmation Email is a second Client-type document sent when the client accepts.
Building the layout. When you add a new Document of type Estimate, leave Start from the standard layout ticked to begin with a company header ([companyname], [companyaddress] and the other company tags) in a Columns block beside a spot for your logo, a greeting, the Estimate Grid, a divider and a terms section. Click the logo box and use the Insert image button to add your logo, then replace the terms text with your own. Or start blank and add the blocks yourself.
The Estimate Grid block appears in the Add Block panel only on Estimate documents, once per document. In the editor it is a dashed box labelled Estimate Grid; the real table of the estimate's line items is filled in when the proposal is sent or viewed. In Preview it shows a sample table.
The estimate settings. On an Estimate document, Edit Settings (and the New Document window) add these:
- Estimate Email. Pick an active Client-type document. If it has no
[estimatelink]tag or button link, a warning says the email will not link to the proposal. It does not stop you from saving. - Include PDF In Email. Attach the estimate as a PDF to the estimate email.
- Estimate Confirmation Email. Pick the active Client-type document sent when the client accepts. The same
[estimatelink]warning applies. - Send Confirmation To. Use Contact Email By Default sends to the client's primary email; Billing Email sends to their billing email.
- Send Estimate PDF in Client Confirmation. Off by default. Turn it on to attach the estimate PDF to the confirmation.
- Set What The Client Sees For This Document. Off by default. Tick it to choose the client-view toggles (visits, quantities, units, line prices, line totals, section subtotals, package visits, service name with description, hide $0 totals, hide $0 prices) that estimates using this document start with. Leave it off and the document sets none, so the service bundle or your org default applies.
How the toggles reach an estimate. The toggles are copied onto an estimate when it uses the document, so editing the document later never changes estimates you already created or proposals you already sent. The order, most specific first: the estimate's own toggles, then the estimate document's, then the service bundle's, then the org default.
- New estimate from a bundle. If the bundle links an Estimate document that sets toggles, those are used. Otherwise the bundle's own Display Settings are used, then the org default.
- Picking or changing the Estimate Document on an estimate. If the document sets toggles, they are copied onto the estimate. If it sets none, the estimate keeps its current toggles.
- Applying a bundle to an existing estimate. The bundle's linked document toggles (or the bundle's own) are copied on, and the bundle's document replaces the estimate's document.
- If you changed the toggles by hand first. Each of the above asks Replace the client-view settings? with Keep mine or Replace toggles. Keep mine still switches the document or adds the bundle lines but leaves your toggles alone. No question is asked when you have not changed them, or when they already match.
- Automatic. An estimate on Automatic has no document of its own, so sending or previewing uses your default estimate document, or the built-in layout if none is the default. Automatic does not copy that default document's toggles onto the estimate; only picking a document (or applying a bundle that links one) does.
Leave a picker on Standard built-in email to use the built-in message instead. The pickers list only active Client documents, and an Estimate document is never offered as its own email. These settings are hidden on documents of other types.
Columns, images and blank lines
- Columns. The Columns block has a 2 or 3 control. Switching from 3 to 2 keeps the third column's text, so switching back loses nothing.
- Images. Where the editor allows images, hover an image and drag a corner handle to resize it. The aspect ratio is kept and the size carries into the preview, the email and the PDF. An Image block has a Size slider (10–100% of the width) instead. Images work in the PDF whatever the file type (JPG, PNG, WEBP, GIF or AVIF).
- Blank lines. Pressing Enter twice leaves a visible blank line, and it stays in the preview, the sent email and the PDF instead of collapsing.
The text editor toolbar
Every rich-text box in the app uses the same toolbar: document blocks, email and invoice messages, service descriptions, estimate line notes and the job's notes and descriptions.
- Font and size. Pick a font (Arial, Verdana, Trebuchet MS, Georgia, Times New Roman, Courier New) and a size from 10 to 32.
- Bold, italic, underline, strikethrough, subscript and superscript.
- Text color and highlight color. Choose a swatch or a custom color; Reset removes it.
- Bullet and numbered lists, alignment, and indent / outdent. In a list, the indent buttons nest and un-nest the item.
- Tables. The table button inserts a 3×3 table with a header row. With the cursor inside a table, the same menu adds or deletes rows and columns, toggles the header row and deletes the table.
- Horizontal rule and Insert image (not available in every box).
- HTML source (the
</>button). Edit the raw HTML, then click the button again to return. Only the formatting the toolbar can produce is kept; anything else is removed when you switch back.
Preview, PDF and test emails
- Preview shows the template with sample data (a sample client, sample amounts, and your company name). It does not use a real client, so tags show sample values. Date tags show real dates: today for [today], [estimatedate] and [invoicedate], and 30 days out for [invoiceduedate] and [duedate] (test emails and PDFs use your company's timezone). Switch between desktop and mobile width. Back to Editor returns you.
- Download PDF renders the template the same way and downloads it, including blank lines, indents, tables and images.
- Send Test Email sends the template, with sample data, to the email address you are signed in with. The subject starts with [TEST]. If the template's Include PDF setting is on, the test email carries the PDF as an attachment, so what you receive is the template rendered with sample values, not a real invoice. Your unsaved edits are included.
If the test email fails with a message about the PDF attachment, turn off Include PDF in the template's settings to test without it, and contact support if it keeps happening.
Template settings
Edit Settings in the top bar opens the template's name, type, subject line, description, whether it is the default for its type, and Include PDF attachment in email (Invoice Email documents). Estimate documents add the estimate settings described above. The subject line can use merge tags too. A template marked as the default is the one preselected when you send that kind of email.
Copying a template
To start from an existing template instead of a blank one, click the three-dot menu at the end of its row on the Documents list and choose Copy. A new template appears named the original name (Copy), with the same type, subject, description, blocks, images, Include PDF setting and, for Estimate documents, the estimate settings. It keeps the original's Active or Inactive status, and it is never marked as the default, so the original stays the preselected template until you choose otherwise. Open the copy to rename and edit it. You need the permission to add document templates to see Copy.
The estimate-accepted confirmation email
When a client accepts a proposal from their online link, they can receive a confirmation email built from one of your own templates. Go to Settings → Estimates and open the Accepted Email tab.
- Confirmation document. Choose any active template of type Client or Estimate. The estimate and client merge tags, such as
[estimatenumber],[estimatetotal]and[clientfirstname], are filled in from the accepted estimate, and[estimatelink]links to the accepted proposal. The template's subject line is used; if it has none, a standard subject is used. If the template you pick has no[estimatelink]tag, a warning says the email will not link back to the proposal. It does not stop you from saving. - Send to. Billing email (the default) sends to the client's billing email and falls back to their primary email when no billing email is set. Primary email always uses the primary address.
- Attach the estimate PDF. Off by default. Turn it on to attach the estimate as a PDF to the confirmation.
With no document selected, the standard built-in confirmation email is sent. The same happens if the selected template is later deactivated or deleted, and the Accepted Email tab shows a notice when that is the case. An address that has hard-bounced receives nothing; a client who has opted out of marketing still receives the confirmation, because it is a service email. If the confirmation cannot be sent, the acceptance itself is still recorded.
The Template picker in the Send Estimate window also warns when the chosen template has no [estimatelink] tag, since the client would have no link to accept the proposal.
Good to know
- Editing HTML source. Changes made in the HTML source view are kept when you click Save, Preview or Send test without switching back first.
- Ticket emails. Emailing from a ticket offers Client documents only, and warns if the one you pick is an estimate email (its estimate tags would be blank).
- Images are fetched safely. An image block that points at a web address is fetched only from a public address, never from your network or the server's.