Landscapt (CRM)

Invoicing & Payments

How an invoice is born, how its status moves, and where the client's own PO number actually goes.

Where invoices come from

Most invoices are never typed from scratch — they're generated for you, and land in Draft waiting for a look before they go out. There are three sources:

  1. A completed visit, on a job with no contract. Marking a job visit complete drafts an invoice automatically — one line item per service on that visit (falling back to a single line from the job's flat rate if it has no services broken out). If you set a Rate (and Qty) on the visit in the dispatch board's visit popup, the visit bills that Rate × Qty (a blank Qty counts as 1) instead of the service's price — the same amount the board's Amt column, the Job Costing tab and the visit reports show. That applies when the visit bills one line (its own service, the job's only service, or the job's flat rate); a visit covering a job with several services bills each service at its own price. How visits are grouped onto invoices follows the client's Invoice frequency (below). Project jobs are never billed per visit (they bill through the project's milestones), and one-time and waiting-list jobs are guarded so a job whose services were split across several visits doesn't get double-billed once the whole job closes. The invoice description follows a fallback chain: the visit's own override, then the job-level override, then the service's own invoice description, then the plain service name.
    Materials ride along too. Any Product on the job that a crew marked Used in the field (inventory decremented, but not yet billed) gets swept onto this same invoice as its own line and flipped to Invoiced so a later visit on the same job can't bill it again. On one-time and waiting-list jobs, Products still Pending (planned by the office) are billed at completion too. On recurring and package jobs only what the crew recorded as Used is billed — Pending products there are the season's plan, so they stay Pending (not billed, stock untouched) until the crew records actual use. A product marked Used, not billed is deliberately skipped — that status exists for materials the crew used but shouldn't be charged for.
    Marking a one-time job Completed from the job page drafts its invoice if no visit has billed yet. If some of its split visits already invoiced themselves, it bills the rest — every completed visit that has no invoice yet — instead of stopping. A service with no visit at all is not guessed at: you get a warning naming it so you can add it by hand.
  2. A contract's billing cycle. The services on a job linked to a contract are billed on that contract's schedule instead — visit completion doesn't invoice them. Its materials still bill when the visit is completed: a product marked In contract (the default on a contract job) bills only what was used above its planned quantity, an unmarked one bills in full. While the contract is still a Draft or Sent, completed visits are held (nothing invoiced): signing the contract puts them inside it, cancelling it unsigned bills them per visit. A daily cron job checks every active contract with auto-generate on, and creates that month's invoice on its configured billing_day_of_month (clamped to the last day of a shorter month). A contract can also bill a month in advance, which shifts the invoice's dated month forward by one. The amount comes from that contract's per-month override if one is set, otherwise its flat monthly amount. This is idempotent — it checks for an existing invoice on that contract for the billing month before creating another. A contract never bills before its start date, nor a billing cycle that began before it (see the Contracts guide for mid-cycle starts and proration). A contract entered or signed a few days after its billing day still has the current cycle billed, with the invoice dated the day it's created and due from that date; one signed months after its start date lists every missed cycle and can bill them on one catch-up invoice (see the Contracts guide). A catch-up invoice has one line per missed cycle, each with the cycle's start as its service date.
  3. Manual creation. You can always build one by hand from Accounting → Invoices, independent of any job or contract.
The manual Invoice buttons follow the same rules. The dispatch board's visit popup hides its Invoice button — and the job page's Invoice button refuses with a message — when the client's contract covers that work (it bills on the contract's cycle) or is still waiting to be signed (the visit is held), for project jobs (billed by milestones) and for snow jobs (billed from Snow Invoicing). An invoice made from one of these buttons is dated the day you create it; its lines keep the visit's service date.
Snow jobs are excluded from the completed-visit auto-invoice entirely. Snow billing runs storm-by-storm on per-inch/hourly rates a flat auto-invoice can't compute — see Snow Invoicing.

Shared stops bill once. When two crews work the same stop (Dispatch Board guide: "Two crews on one stop"), only the lead crew's visit creates the invoice. The added crew's visit carries no revenue and its Invoice button is hidden; if you try to invoice it by another route you're pointed to the lead's invoice.

Invoice numbers and starting at a number

Every invoice gets a number the first time it is saved as anything other than a draft, printed or emailed. A new company starts at #1 and counts up on its own; estimates and tickets are numbered the same way, each from 1. Companies created before this change keep their existing numbers.

  • Coming over from another system? Go to Settings → Accounting → Invoice Numbering, enter the number the next invoice should have (for example 1048) and click Set number. New invoices continue from there; existing invoices keep their numbers. Your estimates and tickets keep counting from their own highest numbers. Estimates have their own card right below it, Estimate Numbering: enter the number the next estimate should have and click Set number; it never goes below the highest estimate number already in use. Admins, managers and anyone with the Accounting or CRM settings permission can change either number. Until you set a number, an existing company's card shows "assigned automatically".
  • Landscapt never reuses a number an existing invoice already has, so if you pick a number inside your existing range it skips the ones in use. You can still type a number by hand in an invoice's header; the same no-duplicates rule applies.
  • Other defaults for a new company. Sales tax starts at 0% (set yours under Settings → Accounting), the card processing fee starts off, the company timezone is taken from the browser at sign-up (change it in Settings → Organization), and the Reply-To address on invoice, estimate and automated emails starts as the sign-up email so client replies reach you.

Sales tax on invoices generated from jobs

When a completed visit drafts an invoice, each line item carries a taxable flag and the invoice picks a tax rate, so the tax the client agreed to on the estimate is the tax that shows up on the bill:

  • Which lines are taxable. A job's services are taxable or not according to the service catalog — unless the job was converted from an estimate, in which case they follow the estimate: services converted from an estimate that carried sales tax are taxable, and services from an untaxed estimate are not.
  • Which rate applies. A job converted from an estimate uses that estimate's tax rate. Any other job uses the client's default tax rate. Tax is computed on the taxable lines only.
  • Changing the company tax rate. Each client keeps its own tax rate, which it gets from the company rate when the client is created. When you save a new company rate (Settings → Organization, or Landscapt Settings → Accounting → Sales Tax), you're asked whether to also move the clients that are still at the old rate — for example, clients added before you first set a rate are at 0%. Choosing Apply to N clients updates them all at once (tax-exempt clients are never changed, and invoices that already exist keep their tax); Only new clients leaves them as they are. This needs the Accounting Settings and Client Bulk Edit permissions, and each change shows in the client's audit trail.
  • Tax-exempt clients. A client whose Client is taxable box is unchecked is never taxed on invoices drafted from jobs, snow invoices or project milestone invoices, whatever default rate is stored or what the estimate carried. Opening and saving such an invoice keeps its tax at 0%.
  • Wording on the line. The invoice line uses, in order, the visit's invoice description, the job's, then the service's. A package job takes the package's Invoice Description, and a job converted from a single-line estimate takes that line's custom Invoice Description (a job converted from several lines keeps each service's own wording).
  • Appending visits to an open draft. If a client is billed monthly and a second completed visit lands on an already-open draft, the draft's tax is recomputed from all of its taxable lines at the invoice's rate — the appended visit is taxed too, not just the first one.
  • Invoice frequency decides the grouping. A client invoiced Daily gets one draft per service day (every visit that day on one invoice), Weekly one per Monday–Sunday week, and Monthly one per calendar month. Upon Completion bills each visit on its own invoice. Visits whose jobs have a different sales rep, PO number or payment terms go on separate drafts in the same period, so each invoice credits the right rep's commission, prints the right PO and carries the right due date. Once a draft is sent, printed or locked, the next visit of that period starts a new draft.
  • Batched invoice dates. For a client invoiced daily, weekly or monthly, the draft that collects the period's visits is dated the last day of that period — the service day, the Sunday that ends the Monday–Sunday week, or the last day of the month — and its due date counts the client's terms from that date. So a monthly client on Net 30 whose first visit is Nov 3 gets a draft dated Nov 30, due Dec 30, and it can't show as past due before the month it bills is even over. An invoice for a single visit (Upon Completion clients, or the visit's Invoice button) is dated the day it is created, in your company's time zone, and is due from that day; each line still shows the date the work was done.
Why this matters. An accepted estimate for $1,908 plus $119.25 tax should produce a $2,027.25 invoice. If a job's invoice comes out with no tax line, check that the estimate it was converted from actually had a tax rate set, and that the client has a default tax rate for jobs that weren't estimated.

Editing and sending an invoice

  • No blank line items. An invoice can't be saved with only empty lines — Save is refused with "Add at least one line item with a description or amount before saving this invoice." Every line that's kept needs a description or an amount; rows you added and left blank are dropped.
  • Line descriptions keep their line breaks and bullets. A line's Description is a multi-line box: press Enter for a new line, and start a line with - or * and a space to turn it into a • bullet. Descriptions copied from an estimate keep their paragraphs and bullets too, on screen and on the PDF.
  • Read-only accounts can still collect. When the subscription is canceled or the free trial has ended, the account is read-only, but you can still email invoices that were already sent or printed, and account statements, so you can collect what you're owed. Draft invoices can't be sent (sending would issue them), and estimates, chemical notices, ticket emails and document test emails are blocked until you subscribe.
  • Every line bills a service. Each line has a service dropdown, and Save is refused until every line has one — there are no free-form lines. The service decides where the revenue lands in reports and which commission rate applies (see Commissions). Lines created from visits, estimates and contracts get their service automatically, and a line left without one shows in amber. The exception is an other charge (a fee such as a late fee), which is labelled “Other charge” and doesn't need a service.
  • Sale type. The header's Sale Type (New sale or Renewal / existing account) decides which commission rate applies. Left blank, it uses the job's, contract's or estimate's, then counts as a new sale.
  • Abandoned new invoices don't linger. Opening New Invoice creates a draft immediately so you can start adding lines; if you close the sheet without saving anything, that empty draft is removed rather than left on the client's Uninvoiced list.
  • Undeliverable email addresses. If the mail provider rejects the client's address when you email an invoice (a malformed or unroutable address, a rate limit, a provider outage), the error you see is the provider's own reason — not a generic "failed to send" — so you can tell a typo in the client record apart from a problem on the sending side.
  • Where invoice emails go. If the client has a Billing Email (Client > Edit > Billing), invoices and account statements go there; with none, they go to the primary email. The send dialog pre-fills that address and you can still type a different one. An address that has hard-bounced is left off (CCs too) and the invoice goes to the remaining addresses; if every address has bounced, the send is refused and names the address. Typing a corrected address sends normally, and Clear bounce on the client lifts a bounce once the mailbox works again.
  • Billing contacts are copied. Every contact on the client whose type is Billing and who is marked OK to email gets a copy (CC) of the client's invoice emails — single sends, Bulk Email and resends from Email Activity — and of account statements. Each address is copied once, and never when it's already in the To line. The single-invoice Send dialog lists them in CC so you can take one off for that send; the statement dialog notes that they're added. To stop copying someone, change their contact type or untick OK to email.
  • Pay Now needs online payments set up. The emailed invoice carries a View & Pay Invoice Online button, and the [paymentlink] merge tag (in invoice emails and invoice automations) renders a Pay Now button. Until your company has connected Stripe and finished its setup, both say View Invoice instead and still open the online invoice, the attached PDF says "View Online" rather than "View & Pay Online", and the online invoice page shows a note asking the client to contact you to pay instead of a Pay button.
  • Drafts have no online link. Downloading the PDF of a draft gives a preview without the "View & Pay Online" link, and a draft's link (if one exists) shows "not found" until the invoice is sent or printed. Printing a draft marks it Printed and the printout carries the link. Creating a link needs the Email Invoices or Add/Modify Invoices permission; someone who can only view invoices gets a PDF with the existing link, or none. Crew logins never see invoice links.
  • Revoking the online link. If an invoice email went to the wrong person, choose Revoke pay link from the invoice's ⋮ menu: every link already sent stops working, and the next email or PDF gets a new one. Voiding, merging, consolidating or deleting an invoice revokes its links automatically.
  • The invoice button in the email. An invoice button or link you place in the Invoice Email template stays where you put it and is sent as a button in the color of the invoice template you send with (your company brand color if it has none). A link inside a sentence stays a normal link. If the template has no invoice link, the View & Pay Invoice Online button is added at the bottom instead, never both. The Preview tab in the send dialog shows what the client will get.
  • Emailing locks the invoice. An invoice is locked the moment it is emailed, including when you email several at once from the Invoices list, so the amounts the client received can't be edited underneath them. Unlock it first to change it. A locked invoice can't be deleted until you unlock it, and an invoice with payments applied can't be deleted at all: the check runs before anything is changed, so a refused delete leaves the invoice exactly as it was. A locked (sent or printed) invoice can be voided without unlocking it; voiding releases the visits it billed so they can be invoiced again.
  • Voiding or deleting an invoice releases its materials. Job materials that the invoice billed go back to Pending (and the stock they used is restored), so they can bill again on a replacement invoice instead of staying marked Invoiced against a dead one. The voided invoice keeps its lines for the record.
  • Void is final. Once an invoice is void it can't be reopened or moved to Draft, Sent, Paid or any other status, and Mark as Sent / Mark as Paid on the Invoices list skip void invoices. A void invoice is also read-only: its lines, amounts, dates, terms and notes can't be edited, and it shows nothing due. You can still print it, lock it or delete it. The void confirmation says so before you commit.
  • Duplicate as draft. To bill a void invoice's work again, open it and click Duplicate as draft (needs Add/Modify Invoices). It creates a new draft for the same client with every line, dated today, with no number until you issue it; the void invoice stays void. Visits, job materials and project milestones the void invoice billed are linked to the new draft only if nothing else has billed them since; a material linked again goes back to Invoiced and its stock is used again. Anything already billed on another invoice stays there and its line is copied as a plain line, so delete it from the draft if it isn't owed again. Lines that were hidden on print stay hidden, and a period draft keeps collecting that period's later visits (unless another open draft already holds the period). Merged (consolidated) invoices can't be duplicated: their lines already live on the invoice they were merged into. A voided contract invoice can be duplicated the same day it was dated — the void one doesn't count against the contract's one-invoice-per-date rule — and voiding never makes the contract bill that period again on its own.
  • Every issued invoice has a number. A draft that was never saved (for example one started from a job or estimate) is numbered at the moment you email or print it, so the client never receives an invoice with no number.
  • Terms and due date on hand-created invoices. An invoice you create from a job, from an estimate or from scratch takes the client's default payment terms (the organization's when the client has none) and gets its due date from them, so a Net 30 client's invoice is due in 30 days and the past-due reminders fire. A due date you type yourself wins.
  • Percent discounts follow the line. A line discount entered as a percent stays that percent when you change the quantity or rate, rather than freezing at the old dollar amount; a flat-dollar discount stays put but can't exceed the line total. The on-screen totals are calculated the same way Save stores them, and Enter Payment always offers the invoice's current balance with a fresh method, date and reference.
  • The online invoice page. The client's link always shows the invoice. When it can be paid it has a Pay button; otherwise a note replaces the button: "This invoice has been voided", "This invoice isn't ready for payment yet" (a draft) or "This invoice has no balance due" (paid or zero balance). A failed payment attempt shows its error next to the button without hiding the invoice.
  • The manual Invoice buttons won't double-bill. The dispatch board's per-visit popup and the job detail page's Invoice button both check for an existing invoice first — a visit or job that's already been invoiced shows View Invoice #N instead and takes you straight there rather than creating a second, duplicate draft. Deleting a visit's first line from an invoice keeps the visit marked as invoiced as long as another of its lines is still there, and the dispatch board's bulk Mark Completed leaves visits that were already completed alone, so neither can bill a visit a second time.
  • Products need a Service first. Adding a Product to a job requires picking which of the job's Services it belongs to — the same rule Estimates already follow. Add Product is disabled (with a hint) until the job has at least one Service on it.
  • Invoice and estimate email templates live in Documents, not a dedicated Email Templates settings page — Settings still has an Email Templates panel, but it's now just a pointer card to Documents, where invoice, estimate, client, and chemical-notice templates are all built with the same block editor.
  • Printing several invoices at once produces one PDF. Selecting multiple rows on the Invoices list and choosing Print Selected combines them into a single multi-page PDF in one tab — it no longer opens a separate print popup per invoice (the same change applies to Estimates' own Print Selected). Each PDF holds up to 100 invoices; a larger selection opens one tab per 100. Only the invoices that made it into a PDF are locked and marked Printed — if one can't be loaded, a message says how many were left unchanged.
  • Emailing several estimates at once asks first. On the Estimates list, Actions > Email Selected opens a dialog with the count and a template, subject and body (client-type Documents, same as a single send). Estimates go out one at a time, each to its own client with its own proposal link. Any that fail are listed with the reason (for example no email on file, or approval pending), and Retry failed re-sends only those.

Hiding lines to keep an invoice clean

An invoice with many visits, dump runs or add-on charges can read as cluttered. On any line, click the eye icon (it appears when you hover the row) to hide it from the customer. A hidden line's amount is folded into the nearest visible line above it — the service it was entered under — so the printed rows still add up to the Subtotal. If nothing visible is above it, the amount goes into the nearest visible line below. Click the eye again to show it.

  • Hiding is presentation only. The line stays on the invoice with its own amount, tax and discount, keeps its visit and product links, and the invoice total and any accounting sync don't change. QuickBooks still receives every line, hidden ones included — so when you hide lines, send the invoice to the customer from Landscapt, not from QuickBooks. Nothing about the job or visit is touched — unlike deleting the line, which can leave a visit looking unbilled and send a product back to pending.
  • Where it applies: the PDF (print and download), the emailed invoice (attachment and the invoice grid merge tag) and the online invoice page. Your own invoice screen still shows every line, dimmed, with a crossed-eye icon, and under its service a Rolls into: note naming the visible line its amount prints inside (worth a glance after merging invoices or reordering lines).
  • Order matters — and you control it. Drag a line by the grip on its left (or use the up and down arrows on a phone or tablet) to put it where you want it. Put a dump run directly under the service it belongs to before hiding it, because a hidden amount always lands in the nearest visible line above. Reorder and the amount moves with it. A hidden line's own discount rolls up with it, and the parent row's printed rate becomes its combined total divided by quantity.
  • If every line is hidden, the setting is ignored so the invoice never prints with no rows. A locked invoice can't be changed until it is unlocked.

Reordering invoice lines

Lines print in the order you see them on the invoice screen — on the PDF, the emailed invoice, the online invoice page and in your accounting sync. To change it, drag a line by the grip handle on its left edge, or tap the up / down arrows on narrower screens. The new order saves immediately.

  • Reordering changes only the order. Amounts, tax, totals, visit links and product links are untouched.
  • With hidden lines, the order decides which visible line absorbs each hidden amount (the nearest one above). A note under the table reminds you when an invoice has hidden lines.
  • You need permission to add or modify invoices, and a locked or void invoice can't be reordered until it is unlocked. Lines you add later go to the bottom.
  • When you merge invoices, the primary invoice's lines stay first and each merged invoice's lines follow it, in the order you selected them, each keeping its own order.

Estimate sub-items on the invoice

Sub-services and materials added under an estimate line are priced inside the service, so an invoice normally shows one service line at the combined price. On the estimate, each sub-item has an On invoice button (next to On estimate). With it on, and for one-time, waiting-list and recurring jobs, the invoice lists that sub-item as its own row under the service and takes its amount out of the service row — the total is unchanged. Sub-items left off stay folded into the service price. The rows are ordinary invoice lines, so you can still hide any of them with the eye icon described above. The choice is captured when the estimate is converted to a job, so changing the estimate later doesn't alter an existing job. To change it on a job, open the job and click the On invoice / Not on invoice tag beside the sub-item under its service; it applies to invoices created from then on, not ones already built. On a recurring job every visit's invoice shows the sub-item's per-visit share (its total ÷ the line's visits) — whether the invoice is made automatically when the visit is completed or with the Invoice button on the visit or job — using the service's Visits count; a recurring service with no Visits count bills one service line. Package jobs always bill a single service line.

Chemical record and technician notes on invoices

In Settings > Accounting > Invoice Templates, each template has two optional checkboxes:

  • Add chemical application record adds a Chemical Application Record page to the invoice PDF: product, EPA #, ratio, areas, amount, method, targets, re-entry and applicator for the visits the invoice bills. Only applications that count as applied appear — a chemical preloaded at the planned amount stays out until the crew or office confirms it. Used on the emailed PDF too.
  • Include technician completion notes puts the notes the crew wrote when completing each billed visit into the invoice's Notes section (several visits are prefixed with the visit date). Customers will see exactly what the crew wrote, so leave it off unless your crews write customer-ready notes.

Account balance box. On a template that shows the client's account balance, the box lists Previous Balance and this invoice's total, then Credit on Account when the client has payments, prepayments or credits not yet applied to any invoice. Account Balance is what they owe after that credit (negative when they are in credit), and the payment stub's Amount Due never goes below $0.00.

Photos on an invoice

You can attach photos to an invoice — a before/after of the work, a damaged item, proof of service. Attached photos print on extra pages at the end of the invoice PDF and show as a gallery on the client's online invoice page.

  • Where to add them. Open the invoice's Photos tab, or expand Photos to include (PDF and online invoice) in the email dialog so you can pick them at send time. Both are the same list.
  • Three sources. Add from job / visit photos shows photos from this invoice's visits and jobs, plus Job Photos jobs linked to the client or project. A Job Photos job created with only a customer name won't be linked, so use the picker's search box (or Use client name). Upload adds new images straight from your computer or phone.
  • Captions and removal. Each photo has an optional caption, and the trash icon removes it from the invoice (the original job or visit photo is untouched).
  • Limits. Up to 12 photos per invoice, images only (videos and PDFs stored with job photos aren't offered). iPhone HEIC photos are converted to JPEG automatically, and large phone photos are shrunk before upload. Only JPEG and PNG print in the PDF, and very large photos may be left off the PDF to keep it small enough to email — they still show on the online invoice page. Print Selected (bulk print) leaves photos out.
  • Who can edit. Attaching, captioning, and removing needs the permission to send invoices or to add/modify invoices.

Other charges (late fees, trip charges, surcharges)

Other charges are a catalog of standard fees you add to invoices — a late fee, trip charge, fuel surcharge, returned-check fee and so on. They're separate from services, so they don't need a service and don't earn commission.

  • Set them up in Settings > Accounting > Other Charges. Each has a name, a description (what prints on the invoice), an amount, and a Taxable switch. The amount is either a Fixed $ figure or a % of invoice (a 4.5% fuel surcharge, say). Turn a charge off to stop offering it without losing the invoices it's already on.
  • Starting from scratch? While the list is empty, click Add common charges to add nine standard fees (Bond Fee, Credit Card Processing Fee, Fuel Surcharge, Interest, Late Fee, Local Agency Fee, Permit Fee, Returned Check Fee, Trip Charge) at $0.00, not taxable. Set the amounts you actually charge and delete or turn off the ones you don't.
  • On one invoice, open Add Line Item; active charges are listed under an Other Charges heading below your services. The line is a normal line — edit its amount, quantity or taxable flag like any other. Changing the catalog later never changes lines already on invoices. A percent charge is worked out when you add it, from that invoice's service lines (each line after its own discount; other charges and the invoice discount aren't counted), and the line prints with the percent, e.g. “Fuel Surcharge (4.5%)”. It's a fixed dollar line from then on — it doesn't change if you edit the services afterwards. With no service lines yet there's nothing to take a percent of, so it isn't added.
  • On many invoices at once, tick them in the Invoices list and choose Actions > Add Other Charge…. Pick the charge, adjust the amount or percent if this run needs a different one (it must be more than zero), and it's added to every selected invoice and their totals recalculated. A percent charge is worked out separately on each invoice, so every invoice gets its own dollar figure; invoices with no service lines are skipped. Locked and void invoices are skipped, and the result tells you how many were. You need the Add / modify invoices permission.

The Invoices list: columns and filters

  • Columns menu. Besides the usual Invoice #, Status, Client, dates, Total, and Balance, you can show Account Balance (the client's true balance, net of credits and prepayments — green when the client is in credit), Prepay, Credits (hidden until you turn it on), Payment type, Sent / Printed, and Frequency.
  • Sent / Printed shows where each invoice stands on getting to the client: a draft shows the queue it's waiting in (To Email, To Print, or To Email & Print, from the client's invoice-delivery preference); anything issued shows Sent or Printed.
  • Frequency is the contract billing cadence (Weekly, Bi-weekly, Monthly, Quarterly, Annual); an invoice not tied to a contract reads One-time.
  • Payment type shows Credit Card or ACH when the client has an autopay card or bank account saved (that's what puts the invoice in the To Charge queues), otherwise the invoice's own preferred method, then the client's default.
  • Filters. Click a filter label above the table. Date takes a from/to range (either end can be left open), Balance takes At least / At most / Exactly with a dollar amount, and Status and Payment type are pick-from-list. The Status filter matches what the Status column shows, so a past-due Sent invoice is found under Overdue.
  • Sorting and layout. The list opens sorted by invoice number, and Status, Account Balance, Prepay, Credits, Payment type, Sent / Printed, and Frequency can be sorted too. The table fills the page width, and row actions appear over the right edge of a row on hover instead of taking their own column.

The Payments page uses the same range filter: filter by Date with a from/to range. It opens on Last 30 Days; the All tab shows every payment regardless of age, and Deleted shows removed payments. Searching or filtering on a column also looks past the 30-day window, so an older payment is never hidden from a search. The page header counts live payments only (on the Deleted tab it counts deleted ones). Export downloads live payments; on the Deleted tab it downloads the deleted payments with a deleted column (the date removed), and importing a file skips any row with that column filled in, so a deleted payment is never recreated.

Selections and tabs. On the Invoices, Estimates, Tickets and Contracts lists, changing the tab, the search or a column filter clears the selection, so a bulk action only ever acts on rows you can see. Invoice due dates and the Past Due tab use your company's time zone.

Invoice status lifecycle

Five statuses form a straight line; two more are side states that sit outside it — they describe an invoice's condition rather than a step it passes through.

StatusKindWhat causes it
DraftLinearCreated but not yet sent — either by hand or auto-generated (see below). Fully editable.
SentLinearYou emailed or printed the invoice to the client.
ViewedLinearThe client opened their invoice link. Only reachable once an invoice has actually been shared, so it never appears on an invoice still in Draft.
PartialLinearA payment was recorded against the invoice, but the balance is still greater than $0.
PaidLinearamount_paid_cents has covered the full total — balance is $0.
OverdueSide stateNot a stored status — computed on the fly from the due date whenever it's still displayed and unpaid. An invoice with no due date (whatever its terms) goes overdue the day after its invoice date — the same aging rule the A/R reports and the Invoice past due automation use. An invoice with a zero or negative balance is never overdue, and neither is one whose balance has been cleared. It disappears the moment the balance clears or you void the invoice, with no cron job flipping a column.
VoidFinalSet by hand when an invoice should no longer count — a mistake, a client dispute you're not pursuing. Void is final: a void invoice can't be changed to any other status (its status menu only shows Void). It is excluded from “overdue” and left alone by all the auto-status logic below. To bill the same work again, use Duplicate as draft on it.

Draft → Sent → Viewed → Partial → Paid is the path a normal invoice walks. Overdue and Void can layer on top of (or, for Void, replace) wherever an invoice sits in that line — Draft, Paid, and Void invoices are never shown as Overdue no matter how old their due date gets. Void is the end of the line: a void invoice never changes status again. When a payment is removed or refunded and an invoice is left with nothing paid on it, a Printed or Viewed invoice keeps that status; one that was Partial or Paid goes back to Sent.

Only issued invoices count. An invoice is "issued" once it has left Draft and isn't Void — Sent, Viewed, Partial, Paid, or printed. Draft and Void invoices are excluded from every revenue and receivables report, dashboard, and KPI (Invoiced Revenue, A/R Aging, Invoices with Balances, Sales Tax, P&L, and so on), and from a client's Account Balance — the client header shows drafts separately as the Uninvoiced line instead. The one place drafts appear in reporting is the Income Not Invoiced report, which exists to list them. Practically: a completed visit isn't revenue on the books until you print or send its invoice.
Paid and Partial follow recorded payments. You can't set an invoice to Paid (from its status menu or the bulk Mark as Paid action) while its balance is still owed — the app tells you to record a payment instead, so the balance, the client's Account Balance and the charge queues stay correct. Likewise an invoice with payments recorded can't be moved back to Draft or Sent.

Merging and consolidating invoices

On the Invoices list, tick two or more invoices and choose Merge / Consolidate Invoices from the actions menu. What happens depends on whose invoices you picked.

  • Same client (merge). You pick one invoice to keep; the others' line items move onto it and they're voided. Locked invoices can't be merged. Every invoice must use the same tax rate: the merged invoice taxes all its lines at the kept invoice's rate, so merging a 7% invoice into a 0% one would silently drop tax already billed. The dialog names the two rates; change one invoice's rate first.
  • Sub-accounts of one parent (consolidate). To bill a property manager for several properties together, select the invoices from the sub-accounts and choose the same action. It creates one new invoice on the parent account. Each line is tagged with its sub-account name in brackets, so the customer can see which property it belongs to. Every line keeps the tax it was already charged, so sub-accounts with different tax rates stay correct (the invoice's tax rate shows a blended figure when they differ). The original invoices are voided and linked to the new one. The new invoice starts as a draft: review it, then print or send it like any other.

Consolidating is blocked for locked invoices, invoices already synced to QuickBooks, invoices with a bank payment still processing or an open dispute, and invoices where a sub-account has already made a payment (a payment stays with the account that made it). Payments the parent made, such as one check covering several properties, move onto the new invoice.

Recording payments

A payment is its own record — not a field on the invoice — so one payment can be split across multiple invoices for the same client in a single entry (useful when a client pays one check against several open invoices at once). Each payment stores a method:

MethodNotes
CashPaid in person, no processor involved.
CheckPaid in person or by mail, no processor involved.
ACH/E-CheckBank-to-bank transfer — either a manual entry, or a real ACH charge through a saved bank account (see Online Payments below).
AutoPayRecorded automatically when a scheduled autopay charge succeeds — not something you pick by hand.
Credit Card– Visa / MasterCard / AmEx / DiscoverOne method per card network, so reporting can split card volume by network.
AR Write-offZeroes out a balance you're not going to collect (bad debt) without pretending real money changed hands. Non-cash — excluded from every cash/collected report. Offered in the invoice's Enter Payment dialog as well as on the Payments page, and can never exceed the invoice's remaining balance.
OtherAnything that doesn't fit the above — barter, a manual adjustment, etc.

What counts as "collected." Payment reports and every "Collected" or "Payments" figure (Payment Audit Summary, Invoices and Payments, P&L Cash Basis, the Cash Collected KPI, dashboard gauges) count only cash payments: an AR Write-off zeroes a balance without money changing hands, so it is excluded, and so are account credits applied from a previous overpayment. Amounts are also net of refunds — a $500 card payment refunded $100 counts as $400 collected. In the Custom Analysis builder the Payments dataset exposes this as the Cash Received, Account Credit, and Net Amount (after refunds) columns.

A payment can only be applied to an issued invoice. Draft invoices are still uninvoiced work and Void invoices are dead, so neither appears in the allocation list — send or print the draft first, then apply the payment.

Overpayments never push an invoice negative. A payment applies to an invoice only up to that invoice's remaining balance; anything beyond it stays on the payment as unused credit. If you type more than the balance into an allocation box it's capped on the spot ("Capped at this invoice's balance — the rest stays as unused credit"). An $80 check against a $55 invoice marks the invoice Paid at $55 and leaves $25 unused; that $25 shows up on the client as Credits and can be applied to a later invoice — it isn't lost and it isn't reported as "Paid −$80." The same limits are enforced on the server: an invoice can never be allocated more than its total, and a payment can never allocate more than its own amount.

Enter Payment records; Collect Payment charges. The invoice's Enter Payment dialog only records money you already received — a check, cash, or a card swiped on a separate terminal. Choosing a credit card or ACH method there does not charge anything. To actually charge a card or bank account, use Collect Payment, which is available once Stripe is connected under Settings > Accounting (ACH also needs the ACH setting turned on). When Stripe is connected, Enter Payment also offers a Charge a card or bank account instead shortcut that opens Collect Payment; when it isn't, the dialog says so.

Changed the invoice total after opening Collect Payment? The dialog always charges the invoice's balance as of when you click Continue. If you close it and edit the invoice, or the total changes while it's open, it starts over from the new balance. Open it again and the Balance Due shown matches the invoice.

Writing off a balance. The invoice's Enter Payment dialog offers AR Write-off (non-cash) alongside the real payment methods. A write-off is capped at the invoice's balance ("A write-off can't exceed the invoice balance") and, because no money changed hands, is excluded from every cash collected figure — see "What counts as collected" above.

Zero and negative payments are rejected. A payment amount must be greater than $0.00 ("Payment amount must be greater than $0.00").

Typing amounts. Currency fields — payment allocations, contract amounts, employee rates — keep exactly what you type while you're in the field and format it (e.g. 55 → $55.00) when you leave it. Nothing is reformatted mid-keystroke, so "55" can't turn into $5.01 on the way in.

Money changes only through the payment tools. A payment's amount, its refunds and its online-payment details, how it is split across invoices, and an invoice's paid amount, balance and Paid / Partial status change only through Enter Payment / Edit Payment, Apply Credit, Refund and the invoice editor (which recalculates the balance from the lines). Writing those figures any other way — through the API or an integration, say — is refused, even for an admin, so a balance can never disagree with the payments behind it. A payment's date, method, reference and notes can still be edited. The only payment that can be deleted is an unapplied manual payment (nothing applied, nothing refunded, not taken online), and only by a role with Delete Card Payments or Delete ACH Payments; for anything else, edit the payment or issue a refund.

Applying (or un-applying, if a payment gets edited) an allocation goes through a single database function that locks the invoice row, recomputes its balance, and derives the new status in one atomic step — so two payments landing on the same invoice at nearly the same moment can't silently overwrite each other's balance update.

Worked example: a partial payment

An invoice for a fall cleanup goes out at a $500.00 total.

  1. Invoice sent: total $500.00, amount paid $0.00, balance $500.00 — status Sent (or Overdue, once its due date passes unpaid).
  2. Client pays $200.00 by check. You record a $200.00 payment allocated to this invoice. Amount paid becomes $200.00, balance becomes $300.00 — since the balance is still above $0.00, status flips to Partial.
  3. Client pays the remaining $300.00. Amount paid reaches $500.00, balance hits $0.00 — status flips to Paid.

If the client had instead underpaid — say $220.00 against that $300.00 remaining balance — the invoice would stay Partial at an $80.00 balance; a later short payment doesn't skip straight to Paid just because a lot has accumulated. Only a balance that reaches exactly $0.00 (or is written off, or the invoice is voided) closes it out.

And if the client overpaid — a $350.00 check against that $300.00 balance — the invoice takes $300.00 and flips to Paid; the extra $50.00 stays on the payment as unused credit, listed under the client's Credits until you apply it to the next invoice.

You don't have to remember it's there. Any issued invoice with a balance shows a prompt when that client has unapplied money on them — an overpayment, a prepayment, or a deposit taken when they accepted a proposal — with an Apply to this invoice button. It uses the oldest money first and never applies more than the invoice still owes, leaving any remainder for next time. A proposal deposit is reserved for its estimate: it only counts (and can only be applied) on invoices for that estimate's job, project or contract, until you release it to general credit from the estimate.

Discounts, tax rate, and quantity limits

  • Discount can't be negative and can't exceed the invoice subtotal. Anything higher is clamped to the subtotal when you leave the field, and if you remove lines after entering a discount the preview total never goes below zero. Tax is calculated after the discount, and the discount is split between taxable and non-taxable lines by their share of the subtotal. For example, $1,000 of non-taxable labor plus $200 of taxable materials with a $200 discount: $33.33 of the discount comes off the materials, so tax is charged on $166.67. Invoices issued before this rule keep the figures they were issued with, even if you edit them later.
  • Tax rate is limited to 0%–100%.
  • Line quantities can't go below zero. On jobs, a blank, zero, or negative quantity falls back to 1.
  • Voiding. An invoice with payments applied can't be voided. The Void button is greyed out and hovering it says to refund or unapply the payments first. Sent and printed invoices can still be voided.
  • Disputed invoices. When a client's bank opens a chargeback on a card payment, the invoice is flagged while the dispute is open: it drops out of the To Charge queues, and Charge Saved, Charge All, and the pay links refuse it ("This invoice has a payment dispute open. Resolve the chargeback before charging it again."). If the dispute is won the money comes back, so charging again in the meantime would collect twice. The flag clears when the dispute closes. When a won dispute's money comes back and the invoice no longer owes it (it was paid another way meanwhile), it shows as the client's account credit, ready to apply.
  • Charge and Void buttons on the Invoices list, when disabled, show why on hover — for example a card charge or bank debit that's still processing (bank debits take a few business days to settle), or payments that must be refunded before voiding.

The “PO Number” field vs. the PO module

These are two unrelated things that happen to share three letters. The “PO Number” field on an invoice or estimate is a plain free-text field the client's reference number gets typed into — it has no link whatsoever to Equipt's internal Purchase Order module (Requisitions → POs → Receiving).

Example. A commercial property manager emails: “please put PO# 4521 on the invoice, our AP system needs it to pay you.” That's their own internal purchasing reference, not anything from your side. You:

  1. Open the invoice, edit the PO Number field, and type 4521.
  2. It prints on the invoice PDF (labeled “PO Number” / “PO #” depending on the PDF template) so their AP department can match it against their own system.
  3. Nothing else happens — no requisition, purchase order, or vendor record is created or touched. A job or contract can also carry its own po_number, which flows onto invoices generated from it the same way.

If you actually want to know what a job or project cost you in vendor materials — reconciling against real Equipt/PO purchase orders, not a client's AP reference — that's a different mechanism entirely: assign the PO line item's Project field to the matching CRM Project, rather than trying to tie a line item to a specific job or invoice. Cost tracking rolls up at the project level, so that's where to look to see what a project actually cost in purchased materials — not on the invoice.

FAQ: Does the “PO Number” field on an invoice link to a purchase order in the PO module? No. It's a free-text field for the client's own reference number and has no connection to Equipt's internal PO/procurement records.

Online payments (Stripe)

Collecting payment straight from the invoice — a saved card or bank account, Autopay, bulk “Charge All” runs, processing fees — is its own workflow, covered in full in the in-app Online Payments (Stripe) documentation. Short version: connect a Stripe Standard account under Settings → Card Payments, save a card or ACH bank account per client, and charge it via “Charge Saved” or a fresh entry. Autopay is a separate toggle from simply having a saved payment method on file. A processing fee is added automatically to card charges (not ACH) and can be waived or overridden per charge; fees post to the P&L as “Credit card processing fees” income.

See the Support / Docs section in-app for the full walkthrough.

Snow invoicing

Snow jobs don't go through any of the flow on this page — no auto-invoice on visit completion, no contract billing cycle. Snow is billed through its own dedicated flow at CRM → Accounting → Snow Invoicing, built around per-inch and per-hour storm rates instead of flat job/service pricing.

See the Snow Invoicing guide for the full walkthrough — this page won't re-cover it.

Good to know

  • Deleting a synced invoice. An invoice that has been sent to QuickBooks can't be deleted. Void it instead so QuickBooks is updated too.
  • Consolidated due date. A consolidated invoice's due date is worked out from its own date and payment terms, so it isn't overdue the day it's created.
  • Charge from the list. Charge in the Invoices list asks for confirmation, showing the client, amount, invoice number and saved card. On a touch screen the row's Open, Charge and Void buttons sit in their own column instead of covering the row.
  • Won chargebacks. When you win a dispute on a payment that was split across several invoices, the money goes back onto those invoices (up to each one's balance), with anything left over as account credit.

More in Landscapt (CRM)

Clients, Properties & Leads
Client accounts, commercial hierarchies, service properties, and the activity timeline that ties it all together.
Estimates & the Budget Engine
How an estimate is built, how its numbers are actually calculated, and how it becomes a job.
Jobs & Packages
The six job types, how a job's status differs from a visit's status, and how a Package template turns into a billed job.
Services & Pricing
The service catalog, bulk catalog price changes, and Price Adjustment runs — which prices seed new work and which ones actually bill.
The Dispatch Board
The daily scheduling screen crews and dispatchers live in — visits, crews, status, and how actual hours get calculated.
The Crew App
What a crew sees on their phone — the day's stops, clocking on and off, breaks, photos, and sending work back to the office.
Sales Meetings
Booking appointments per sales rep, the double-booking warning, and the split between a rep's direct reminder and the client-facing automation trigger.
The Waiting List
Jobs with a date range instead of a date, held for opportunistic scheduling — and how to actually get them dispatched.
Snow Jobs & Storm Dispatch
Storm events, priority dispatch, and the invoicing flow built specifically for snow.
Contracts
Ongoing billing agreements — monthly amounts, seasonal overrides, sub-properties, and how signing and invoicing actually work.
Communication Automations
How sequences, triggers, and events work — and how Automations differ from Sales Campaigns.
Forms & Lead Capture
Building, publishing, and sharing public forms — and what happens to a submission once it lands.
Document & Email Templates
Building the reusable emails and text messages that go out with invoices, estimates, campaigns and automations — blocks, merge tags, buttons, previews and test sends.
Tickets
Support and service tickets — where they come from, how they're worked, and how they connect to the rest of a client's record.
Damage Cases
Tracking property damage and warranty claims tied to a job — what a case captures, how cost rolls up, and a real current limitation in how it connects to a client record.
Warranties
Tracking the warranties you give on walls, walkways, patios and renovations — when each starts and ends, how claims tie back to it, and expiry reminders.
Commissions
Paying sales reps a percentage of what they sell — plans and rules by service and sale type, how earnings are calculated, and locking a quarter into a statement.
Injury & Near-Miss Cases
Reporting injuries, illnesses and near misses from the field, following them up in the office, tracking self-paid costs, supervisor alerts, and the Accident Free Workdays KPI.
Job Photos
Field photo documentation, annotation, and before/after comparisons — attached to a job site, not a person.
Online Payments & Stripe
How a client actually pays an invoice online, how Stripe Connect keeps every org's money in their own account, and how the platform takes zero cut.
Browse all guides
© 2026 Landscapt. All rights reserved.