Reporting

Report Center & Dashboards

Where the 100+ pre-built reports live, how a report gets its numbers, and how the ready-made dashboards differ from the ones you build yourself.

Looking for what a specific report actually measures, rather than how the Report Center works? See the Reports Reference guide for a description, filters, and known gotchas for every report.

Where it lives

In the Landscapt sidebar, open Administration > Reports. The Reports page has seven tabs across the top: Dashboard, Custom Dashboards, Report Center, My Reports, Scheduled, Payroll (only for people allowed to see it), and Graphics Library. This page is the Report Center proper, and the tab you pick is kept in the page's web address, so a bookmark or shared link opens on the same tab.

Separate from it is the Dashboards area — the Dashboards tile on the Home screen — which has its own sidebar and holds a set of ready-made dashboards (covered below). One of those, Reports Dashboard, is Landscapt's original built-in reporting page; it's the same page you see on the Reports page's Dashboard tab.

Advanced Reporting add-on. Four tabs — Custom Dashboards, My Reports, Scheduled and the Graphics Library — are part of the Advanced Reporting add-on, along with the New Analysis and dashboard builders. It's included on Enterprise and during your free trial, and an admin can add it to Starter or Growth in Settings > Subscription. Without it those tabs show what the add-on includes, custom dashboards don't appear under the Dashboards tile, and scheduled emails aren't sent. The three built-in dashboards (Sales Overview, A/R Overview and Operations Dashboard) stay on the Custom Dashboards tab on every plan, but changing or copying one needs the add-on, and a built-in you changed while you had it locks like a custom dashboard. Setting the goal on a gauge is not an edit: it works on every plan (see Dashboards below). Everything else on this page — every pre-built report, the Dashboard tab, Payroll, the KPI Scorecard, the Company Report and the job costing reports — is on every plan. These rules are enforced by Landscapt itself, not just hidden in the menus, so they also apply to anyone querying reports through the API. Nothing you built is deleted: it all comes back, and schedules start sending again, once the add-on is added.

The Report Center tab

The Report Center tab is one searchable list (type in Search reports…) of every pre-built report, grouped under section headings. There are 109 reports across thirteen sections:

SectionCountExamples
Service Reports17Visits Report, Backlog Services, Client Count by Service, Client Services Report, Package Summary Report, Skipped Visits Report, Daily Load List, Chemical Tracking Report, Materials Needed for Upcoming Jobs, Over / Under Report
Revenue16Invoice Audit Summary, Payment Audit Summary, Invoiced Products Report, Revenue by Postal Code, Revenue by Service Summary, Daily Production, Sales Activity Summary, Sales Comparison Chart
Client14Client Balance, Client Contact List, Client Referral, New Clients Report, Terminations Report, Cancellation Count Report, Address Verification
Job Hours12Actual v. Budgeted Hours (Today, Yesterday, Week to Date, Last Week, Month to Date, Custom Range), Job Hours Summary, Crew Hours Summary, Drive Time Summary, Timesheet Detail, Resource Time Utilization
Schedule Lists9Employee Directory, Vendor Contact List, Inventory Product List, Call Ahead Required, Service Price List, Upcoming Jobs - No Contract
Audits9Client Timeline Report, Lead Timeline Report, Income Not Invoiced, Visits — Client Has Balance Due, Unapplied Payments, Sales Commission Export, Audit Log, Security & Access Audit, Change Activity by User
Financial8Credit Report, Invoiced Income by Client, Invoices with Balances, Pre-Payments, Profit / Loss — Accrual Basis, Profit / Loss — Cash Basis, Sales Tax Report, Financials
Estimates7Estimates by Stage, Accepted Estimates by Service, Won Estimates Service Products Report, Accepted Estimates — Estimated vs Invoiced Value, Close Ratios by Sales Rep
Job Costing6Job Costing Report, Cost of Goods Sold Report, Job Cost Summary, Service Profitability Summary, Production Rate Accuracy, WIP Report
Lead6New Leads Report, Lead Aging Summary, Closed Leads Summary, Company Scorecard, Sales Summary by Source
Receivables3Statements, A/R Aging Report, A/R Aging Snapshot
Tickets1My Past Due Tickets
Forms1Forms Summary

Click a report's name to open it. Each report has its own page, so you can bookmark the ones you use often.

How a report gets its numbers

Every report in the catalog works in one of three ways:

  • Built on a dataset — the vast majority. The report picks a dataset (see the list below), the columns to show, filters, grouping, totals and sort order, and fills in the values you choose in its filter bar. Every time it runs, the server checks the request again before returning any rows; if a filter value doesn't make sense, you get a plain error message instead of results.
  • Special-format reports — for layouts a simple grouped table can't produce: aging buckets, one-column-per-month grids, and summaries that pull from several kinds of records at once. These are built individually but open and export the same way.
  • Links to a standalone page — a handful of reports (for example the Job Costing Report and the Cost of Goods Sold Report) have their own dedicated page. They're listed in the catalog so you can search for them alongside everything else; opening one takes you to that page. Job Costing and Cost of Goods Sold work the same way: each line is a completed visit in the date range. Revenue is the visit's service rate; labor is the crew's labor cost from clock-out or — when nobody clocked out — an estimate of man-hours × the crew's labor burden rate (marked with a dagger, †); materials are the job materials logged against the visit; and a visit with several services is split across them by each service's share of the man-hours. Labor cost is only shown to admins and roles with a job-costing or payroll-cost permission (Job Costing, Job Cost Summary, Cost of Goods Sold, Show Wage & Labor Burden, or either Profit & Loss report). Everyone else sees the hours and revenue with the labor cost blank, and a crew's labor rate is only ever shown as the crew's average, never per person.

Changing a filter re-runs the report straight away, and your permissions are checked on every run (see Permissions and gating).

The dataset-based reports read from 26 datasets. Each one is a ready-joined table for one kind of record — its columns, their types, and, for status-type columns, a fixed list of choices. These are the same datasets you pick from when you build your own analysis:

Clients · Client Contacts · Client Timeline · Address Verification · Jobs · Job Visits · Job Services (Production Rate Accuracy) · Invoices · Invoice Line Items · Payments · Estimates · Estimate Line Items · Contracts · Contract Service Usage · Timesheets · Crew Drive Time · Employees · Services · Vendors · Products · Chemical Applications · Projects — WIP Schedule · Sales Rep — Current Month · Field Upsells · Tickets · Audit Log

Worked example: Production Rate Accuracy

Production Rate Accuracy lives in the Job Costing section. Its stated purpose: "Compares each service's assumed production rate (sq ft per man-hour) against what crews actually achieved, to flag rates that need recalibrating."

  1. Open it from the Report Center tab (search for "Production Rate") or from a bookmark of its page.
  2. It has a single filter — Scheduled Between, a date-range picker that starts on This Month. Changing the preset (This Month, Last Month, Last 30/90 Days, This Year, All Time, or Custom) works out the new date range on your company's calendar (its time zone, not your computer's) and re-runs the report. All Time really means every row — it isn't quietly limited to This Month.
  3. Behind the scenes it reads the Job Services dataset and keeps only services whose budget method is Production Rate on visits marked completed, scheduled within the date range. It's the visit's status that counts, so a recurring job's not-yet-done visits stay out even once the job itself is marked complete. It shows the scheduled date, client, service name, quantity and unit, the assumed vs. actual production rate, the rate variance (in basis points), budgeted vs. actual hours, and crew size — sorted by rate variance, lowest first, so the worst-performing rates are at the top.
  4. The result is a plain table with two footnotes: only Production Rate method services are included (manual-rate services have nothing to compare against), and a negative Rate Variance means the job took longer than the assumed rate predicted (the rate may be set too aggressively) while positive means the rate may be too conservative.
To recalibrate a rate this report flags, open the service under Administration > Services and change its Production Rate (sqft/hr).

Date ranges, time zones, money rules, and large results

  • Everything runs on your company's clock, not the viewer's. Every date and time a report evaluates — the relative presets (Today, Yesterday, Month to Date, Year to Date), a custom From/To pair, a single date typed into a filter — uses the time zone set in Settings > Organization (Eastern Time unless you change it). A filter on a single date matches that whole day in your company's time zone, and a visit completed at 11:30 PM lands on that day, not the next. Scheduled PDFs show times in your company's time zone as well. Two managers in different time zones looking at the same reports see identical day boundaries.
  • "All Time" means all time. Picking All Time in a date-range filter (or clearing both From and To) runs the report with no date limit at all.
  • Revenue never includes sales tax. Every revenue figure — Profit / Loss, Revenue by Service and by Postal Code, the Sales Comparison Chart, Avg. Gross Revenue per Client, the KPI Scorecard, the home Revenue YTD card, the sales-rep quota gauge, and the dashboard revenue panels — is the invoice total minus sales tax, i.e. after discounts and before tax. Line-based reports (Profit / Loss, Revenue by Service) also take the invoice-level discount off, spread across that invoice's lines in proportion to their amounts. Columns labeled "Total" or "incl. tax" on invoice listings (Invoiced Income by Client, Invoices with Balances, Invoices and Payments) still show the full invoice amount the client owes.
  • One aging rule. An open invoice is past due from its due date, or — if it has no due date — from its invoice date. A/R Aging, Invoices with Balances (Days Overdue), Financials, the Company Report, the KPI Scorecard's AR Over 60 Days, the home Overdue AR card, and the Invoices list's Past Due tab all use it.
  • Consolidated and merged invoices keep their link. When invoices are consolidated or merged into another invoice, the originals still count toward the contract, project, or estimate they were billed for (Over / Under, the WIP Report, Accepted Estimates — Estimated vs Invoiced) once the combined invoice is issued; the combined invoice itself is not counted again.
  • Large results are truncated, and say so. A report returns at most 5,000 rows. When a report or panel matches more than that, a banner reads "Showing the first N of M rows" and the totals row covers only the returned rows — narrow the date range or add a filter to get a complete total.
  • Group subtotals cover the whole result, not just the rows on the page you are looking at, so the on-screen subtotal for a crew or client matches the PDF.
  • Exports carry the totals row. CSV, Excel, and PDF downloads end with the same Totals row the on-screen table shows.
  • Exports keep the cell colors. Conditional-format rules and the color spectrum a report or saved analysis is set up with are filled into the Excel and PDF downloads and the scheduled sends, the same colors the screen shows. CSV has no colors.

Custom analyses ("My Reports")

The My Reports tab lists the analyses your company has saved; click New Analysis to build one from scratch. A custom analysis is built from the same pieces as a pre-built report — pick one of the datasets, then columns, grouping, totals, filters, and sort — except you put it together on screen. It's saved with a name and description for everyone in your company, and it runs through the same report engine, with the same checks, as the pre-built reports.

A few dataset columns exist specifically so a custom analysis can apply the same rules the pre-built reports do (see the Reports Reference guide for the rules themselves):

  • Invoices and Invoice Line Items — an Issued (not draft/void) yes/no column ("Is Issued"). Filter on it for any revenue or receivables figure; the pre-built reports do.
  • Payments — Cash Received (not credit/write-off) ("Is Cash"), Account Credit ("Is Credit"), Net Amount (after refunds), and Processing Fee. A "Collected" number should filter Is Cash = true and sum Net Amount. Note that Net Amount takes a refund off the payment's own date; the pre-built cash reports (Profit / Loss — Cash Basis, Payment Audit Summary, Credit Card Processing Fees, Invoices and Payments, Sales Comparison Chart (Paid), Financials, KPI Week over Week and the Company Report) instead take each refund off on the day it was issued.

Beyond plain columns, the builder supports:

  • Joins — on the Data card, tick Client data (invoices, payments, jobs, estimates, contracts) or the parent invoice / estimate (line items) to add that record's columns, shown as "Client: …". Joined columns repeat on every row, so they're never added into totals. Using a join also requires access to the joined dataset.
  • Client custom fields — every custom field defined in Settings appears as a "Custom: …" column on clients, invoices, payments, jobs, estimates and contracts, and can be filtered, grouped and aggregated like any column.
  • Formulas — a calculated column can combine two columns, a column and a fixed number (e.g. × 100), or an earlier formula, and can be sorted on.
  • Multi-level sort — sort by up to four columns ("then by").

Every report table also has a menu on each column header: sort, filter, aggregate (Sum, Average, Standard Deviation, Count, Distinct Count, Maximum, Minimum — shown as a footer row under the Totals row), format (alignment, number, currency, percent, timespan, true/false, color spectrum, bar gauges), merge duplicate cells and hide column. These change only what's on screen — exports and the saved report stay as run, so a color spectrum or bar gauge picked here isn't in downloads — and Reset view undoes them. The exception is aggregate footers: on the report page and the analysis builder, CSV, Excel and PDF downloads add the same summary rows, computed over the whole result rather than the filtered view (not on dashboards). In the analysis builder the aggregates you pick are saved with the analysis, so they come back when you reopen it and are added to its scheduled Excel and PDF sends (left off a partial, row-capped result, like the Totals row). Filters apply to the rows already loaded, and the totals row follows them.

Partial results. A report or analysis returns at most 5,000 rows. When a result is cut off there, its CSV, Excel and PDF downloads leave the Totals row off (it would only add up the rows included) and end with a line such as "Partial: first 5,000 of 12,345 rows". Narrow the date range or filters to get the whole result.

Saving or running a custom analysis requires the View Report Center permission, and some datasets additionally require a report permission — see Permissions and gating.

Dashboards vs. individual reports

On the Reports page, the Custom Dashboards tab is described on screen as "Multi-tab dashboards built from your saved analyses". A dashboard bundles one or more saved analyses into tabs. You can start from a blank dashboard or from a template — e.g. "Sales Overview" (estimate pipeline, win rate, recent activity), "A/R Overview" (outstanding balances, collections, payment activity), or "Operations Dashboard" — modeled on Service Autopilot's Operations Dashboard, with nine tabs (KPI's, Tickets, Profit / Loss, Upcoming Jobs - no contracts, Won Estimates by Service, Products/Bulk Material, Contracts, Services Insights, Projections) built mostly from reports that already exist in the Report Center. Click a saved dashboard in the list to open it.

The same dashboards also appear in the Dashboards area (Home > Dashboards). Whichever way you open one, it's the same dashboard — a change made in one place shows in the other.

Panel dates. A tab can carry a shared date picker, and each panel chooses whether to follow it. A panel can instead pin its own relative window — Filter to today, Filter to yesterday, Month to date, or Year to date — computed in your company's time zone every time the dashboard loads. The templates use this for their annual gauges: "Invoiced Revenue (YTD, pre-tax)", "New Leads YTD", and "New Clients / Converted Leads YTD" are true January-1-to-today figures and do not move when you change the tab's date picker, so the gauge maximum keeps meaning an annual target.

Gauge goals. A gauge measures progress toward your company's goal. The first time someone opens a built-in dashboard gauge that has no goal yet, the gauge shows the current number and asks "What's your goal for this gauge?" — enter it (in dollars for revenue gauges) and click Save goal. Change it any time with Edit goal in the gauge's corner. Goals are saved for your whole company, work on every plan (no Advanced Reporting add-on needed), and can be set by admins and roles with Manage Report Center; everyone else sees "No goal set yet" until one is. A gauge you built yourself starts from the maximum you gave it in the builder, and Edit goal overrides it.

A panel whose dataset the signed-in user isn't allowed to query shows "You don't have permission to view this panel" in place of the chart — see Permissions and gating.

The Payroll tab

Payroll turns the crew's Start Day / End Day clock (see the Crew App guide) into hours per person per day, ready to correct and send to payroll. It is limited to admins and roles with the "View & Edit Payroll Report" permission (Home → Report Access in the role editor): anyone else doesn't see the tab, and crew logins can't read it at all.

  • Pick the period. From / To dates, or the This week, Last week and Last 2 weeks buttons (weeks run Monday to Sunday, on your company's calendar — its timezone, not your computer's). It opens on last week. A single report covers at most 62 days.
  • Paid time is the shift. Each person's day is clock-in at the shop to clock-out at the shop, less lunch and unpaid pauses. Whether a job pause is paid follows the visit's own override when the office set one, otherwise the company's “Crew pauses are unpaid” setting as it was when that person's day ended — each day keeps the setting it ended under, so changing it later only affects days ended after the change and never re-prices a past or locked pay period. A job's pause comes off a person only up to the time they were on that job, never more. A punch after midnight on a shift that started the evening before (storm work) counts on the day the shift started — and so does its Work Date in the Report Center's Timesheets data and the KPI Scorecard. The On jobs column is the part of that day spent on stops — the same punches Job Costing uses — so the gap is drive and shop time. If nobody tapped Start Day for a person, their job punches are used instead and the day is flagged.
  • Totals by person. One row per employee with Day hours, On jobs, Extra, PTO, Total, Regular and OT. Someone who moved crews during the period, or works on two crews, is listed once with all their hours (the Crew column names each crew they worked on). Click a row to open the day-by-day detail, which shows each day's regular and overtime hours too.
  • Overtime. Each person's Total is split into Regular and OT hours by your company's overtime rule, set by an admin in Settings → Organization → Overtime: either hours over a weekly limit (default 40) in a Monday–Sunday week, or hours over a daily limit (default 8) in one day. The rule in use is printed above the table. Only worked hours count toward the limit: day hours (or your override) plus Extra hours. PTO hours are paid and always counted as Regular — they never push anyone into overtime. With the weekly rule, days earlier in the same week count toward the limit even when your period starts mid-week, and the overtime lands on the day the limit is passed. The limit is per person: hours on every crew they worked that week (or day) count together. Overtime hours are reported, not priced: apply the overtime pay rate in your payroll system.
  • Not linked to an employee. A crew roster entry that isn't linked to an employee record is paid as its own person, so the same worker listed by name on two crews shows as two people and their hours never add up toward overtime. When the period has any, an amber note above the table names them; pick the employee for each one under Team → Crews so their hours combine.
  • Correct any day. In the detail, change the clock-in and clock-out times, the unpaid break minutes (the number you enter is the day's whole unpaid break, replacing the recorded breaks rather than adding to them), or type the hours directly to override them (up to 48 hours for a day); add Extra hours (worked time not on the clock, such as shop time, also up to 48; counts toward overtime) or PTO hours (paid time off, up to 48; paid as Regular, never overtime); write a note saying why; and click Save. An end time earlier than the start is read as the next morning, for storm work past midnight. The reset arrow puts the day back to the recorded figures. Edited days show an adjusted badge.
  • Nothing else changes. Corrections live only on the Payroll report. The recorded shifts and punches stay as they were, and Job Costing, job hours and the Timesheet report are not affected.
  • Check badges. An amber check badge means a day needs a look: the shift was never ended (hours show as zero until someone taps End Day or you set the clock-out), a job punch is still open, or no one started the day for that person. "Started at first job" means the day was opened by the first Start Job rather than Start Day, so the real start was earlier.
  • Export. The Export menu has Excel (a Totals sheet plus a Daily sheet), CSV of totals by employee, CSV of daily detail, and PDF. Every export has Regular Hours and OT Hours columns, per person and per day. Hours are numbers, so Excel and payroll uploads can add them up. The totals include a Days to Review count per person: days with a shift that was never ended (open) or with job time but no Start Day (no shift), where hours may be understated or missing. The PDF prints the totals by employee first, then a separate table for each employee with their days and a total row.
  • Lock a pay period. After a period is exported and paid, an admin sets Lock payroll through at the top of the tab to its last day and taps Lock. From then on nothing dated on or before that day can change — day shifts, job punches and corrections alike, whether from Payroll, the dispatch board's Edit Job Times or the crew app. The pay-related parts of a visit on a locked day are locked too: its pause minutes, whether its pause is paid, and its clock-in and clock-out times (a visit counts as locked when it is scheduled on or before the lock date or carries a crew punch from a locked day). A job punch is dated the way Payroll pays it, so a 1 a.m. punch on a storm shift that started the evening before is locked with that earlier day. Locked days show a Locked badge and can't be edited; anyone who tries is told “Payroll is locked through …; ask an admin to move the lock date”. The lock date must be before today. To fix a locked day, an admin moves the lock back (Move lock) or taps Unlock, makes the change, and locks again. Every move of the lock date is in the organization's change history. Only admins can move it; everyone with Payroll sees it. A shift from a locked day that was never ended stays open (End Day can't close it) until an admin unlocks the day to fix it.
Payroll reads the crew's roster, so an employee has to be on a crew (Team → Crews → Team Assignments, or placed on one for the day on the Crew Board) to be clocked in by Start Day. Someone marked Not working in Edit Crew is skipped. Someone deactivated or taken off the crew partway through a day still has that day's shift closed by End Day, and the office can still correct the punches they already had. Every change to a shift and every correction made here is kept in the audit history. Payroll reports regular and overtime hours but not pay amounts — apply pay rates in your payroll system.

The Graphics Library

The Graphics Library tab holds ready-made panels you can drop into any dashboard with Add to Dashboard, plus panels you saved yourself. Panels come in these visual types: KPI, table, bar, line, pie, gauge, crosstab and pipeline.

Pipeline lists stages top to bottom, each with its total and a bar sized to the largest stage. Sales Pipeline Insight uses it for estimate value by stage: Draft, Quoted, Proposed (sent), Won, Invoiced and Lost. Pick Pipeline as the visual type on any panel with a stage-style label column and one value column.

Monthly trends. Two graphics group a daily query into one point per month:

  • Labor Efficiency by Month — a line chart of budgeted vs. actual man-hours on worked visits. Actual under budget means crews beat the estimate.
  • Drive Time by Month — total crew drive minutes per month. It reads the separate crew drive-time records, so it is its own chart and not a third line on Labor Efficiency.

Both follow the dashboard tab's shared date range. They add up the days within each month, so they suit totals like hours and minutes.

The ready-made dashboards

Separate from anything you build, the Dashboards area (the Dashboards tile on the Home screen) has a fixed set of ready-made dashboards. They're listed on its Overview page and in its sidebar:

DashboardWhat it showsWho sees it
Equipt DashboardWork orders, purchasing and asset managementPlans that include Equipt
Landscapt My DayYour daily schedule and tasksPlans that include Landscapt
Reports DashboardLandscapt's built-in reporting dashboardPlans that include Landscapt
KPI ScorecardCustomizable KPIs computed live from Landscapt dataPlans that include Landscapt; not crew logins
FinancialRevenue, expenses and marginOne company's own data only
Labor EfficiencyBudget vs. actual labor hoursOne company's own data only
Driver Safety ScoresDriver safety scoring from the vehicle tracking integrationOne company's own data only
Company ReportSales, operations and A/R computed live from Landscapt dataPlans that include Landscapt; not crew logins
Social MediaWeekly reach, engagement, followers and leads by platformNot crew logins; needs the View Social Media permission

The Overview page and sidebar list these plus any Custom Dashboards you've built. "Reports Dashboard" is worth calling out: it isn't part of the Report Center at all — it's Landscapt's original built-in reporting page, which the Reports page also shows on its Dashboard tab.

The KPI Scorecard

Dashboards > KPI Scorecard is an annual goals card: metrics grouped into categories (Financial, Operations, Sales, People by default), each with a Target, an Actual, a progress bar, and a percent weight. Every company gets one scorecard, created from the default layout the first time someone opens the page, and the year selector in the header switches which calendar year you are scoring.

Metrics come in two kinds, and the badge on the Actual cell tells you which:

  • Auto — computed live from Landscapt data every time the page loads (invoices, payments, jobs, visits, timesheets, estimates, clients, employees, tickets). Nothing is cached, so the number is never stale. Hover the auto badge for the exact definition. Revenue metrics count issued invoices only (no drafts or voids) and exclude sales tax, and Cash Collected counts cash payments only — no account credits or AR write-offs, net of refunds. A dash means there was nothing to compute from for that year — for example Revenue (Sold) needs jobs with a Date Sold, and Maintenance Retention needs recurring or package jobs that existed before January 1. AR Outstanding and AR Over 60 Days are always as of today, so AR Days (today's open balance ÷ the year's average daily invoicing) is left blank when you score a past year. A package counts as retained only when its program window reaches the year you are scoring, so last season's package that wasn't renewed counts as lost. Metrics built on visit labor cost (Gross Profit, Labor % of Revenue, Revenue per Man-Hour) need one of the job-costing report permissions, the same as the Job Costing reports.
  • Manual — click the Actual cell and type the value. These are things Landscapt has no source for: NOI and net margin, overhead ratio, AP days, labor efficiency against payroll hours, fleet safety score, eNPS, training hours, training completion, absenteeism, plus any custom metric you add. Accident Free Workdays is calculated, not manual — it comes from Injury Cases; see the Injury & Near-Miss Cases guide.

Targets are always editable (click the cell). Some auto metrics are point-in-time snapshots rather than year totals — AR Outstanding, Open Pipeline, Active Clients, Contract MRR, Open Tickets — and say so in their badge tooltip.

Scoring. Progress is actual ÷ target, capped at 100%. Metrics flagged "lower is better" (AR Days, OT %, Skipped Visit %, …) invert that: meeting or beating the target is 100%, and progress degrades the further you are above it. A category's score is the weight-averaged progress of its metrics that have both a target and an actual; the Overall pill is the plain average of the category scores.

Customize. The Customize button switches the card into an editor where you can:

  • Add a metric from the catalog dropdown (grouped by suggested category, each tagged auto or manual) — about sixty are available, including Cash Collected, Gross Profit, Labor % of Revenue, Revenue per Man-Hour, AR Over 60 Days, Visit Completion Rate, Budget vs Actual Hours, Maintenance Retention (overall, residential, commercial), Client Retention, New Hires, Average Tenure, Days Since Last Damage Case.
  • Add your own manual metric (name + unit) for anything you track outside the app.
  • Remove any metric, including the defaults — it goes back into the dropdown so it can be re-added later.
  • Change weights, toggle lower-is-better, reorder rows, rename or add categories, or Reset to default.

Who can do what. Anyone whose role has View Report Centercan open the scorecard and see every number. Changing it — editing a target, typing a manual actual, or anything in Customize — requires Manage Report Center, the same permission that gates building Custom Dashboards and custom analyses. Admins always have it; of the default roles, Owner and Operations Manager have it and the rest (Accounting, Office Admin, Sales / Account Mgr, Scheduler, Customer Support Rep) are view-only. Without it the Customize button is hidden and the cells are read-only, and a change is refused even if someone tries to make it another way. Crew logins have neither permission, so they cannot reach the page at all. Roles are managed under Settings > Landscapt Settings > Roles.

The layout is saved once for your whole company; targets and manual actuals are saved separately for each year. Only people in your company can see either.

The Company Report

Dashboards > Company Report is a live, always-current sales and operations snapshot, computed entirely from Landscapt data. It has no filters or date picker — it's always "as of now": year-to-date figures run from January 1 of the current year, and the monthly tables cover the trailing three calendar months, the current one as month-to-date.

Every number comes from the same report engine and datasets the Report Center uses (Clients, Estimates, Invoices), plus direct look-ups of payments, invoices, and tickets for the handful of figures — per-client aging buckets, cash-only payment totals, ticket assignee counts — that a simple grouped report can't produce.

The page has four sections:

  • KPI row — Invoiced Revenue, Outstanding A/R, New Clients, and New Leads, year-to-date. The progress bars under Invoiced Revenue, New Clients, and New Leads read the matching Target from your KPI Scorecard — set a target there and it shows up here automatically.
  • Sales Dashboard — monthly new-client/lead trend, close ratios and open pipeline by sales rep, a won-estimates leaderboard, and this month's new clients by rep and source.
  • Operations — invoices, sales tax, and payments over the trailing three months, open tickets by category and assignee, and unapplied/pre-payment totals.
  • Collections / A/R — the standard five-bucket aging breakdown and the ten largest outstanding balances, each tagged OK / Monitor / Action / Escalate by a fixed dollar-threshold rule (see below).
Flags & Priority Actions are rule-based, not AI-generated. They check a fixed set of thresholds against the same numbers on the page — e.g. any client with a large balance over 90 days past due, more than 30% of A/R in the two oldest buckets, a meaningful pile of unused pre-payments, several unassigned tickets, revenue running behind a pace-adjusted annual target. No account gets free-form judgment or a narrative explanation; a flag either fires past its threshold or it doesn't. The thresholds are the same for every company and can't be changed from the page.

Access works like the rest of the Report Center: you need View Report Center plus View Company Report to open it, your plan must include Landscapt, and crew logins don't see it. The close ratio, open pipeline and won-estimate cards also need one of the estimate report permissions; without one they are replaced by a short note. There's nothing to edit on this page, so there's no separate Manage Report Center permission for it, unlike the KPI Scorecard.

The Social Media dashboard

Dashboards > Social Media tracks your social accounts week by week. Nothing is pulled in automatically — someone logs each week's numbers by hand, copied from each platform's own Insights/Analytics page.

  • Log a Week — pick a Monday–Sunday week, then fill in one column per platform: posts, views/reach, profile views, likes, comments, shares, saves, total followers, net new followers, leads and notes. Leave anything you don't know blank rather than typing 0; platforms left completely blank aren't saved. If you type Total followers, Net new followers works itself out from the previous week's total.
  • Overview — KPI cards (posts, views, profile views and profile view rate, engagements and engagement rate, net new followers, leads) with the change versus the previous period, a follower snapshot, and weekly charts. Use the platform chips and the date-range menu (last 4 or 12 weeks, this month, last month, year to date, all time) to narrow it.
  • Platforms & Monthly, Weekly Log — a side-by-side platform comparison, a monthly summary and the full weekly history, where a logged week can be edited or deleted.
  • This Month vs. Goals — content published, engagement rate, leads and follower growth against a minimum and a stretch goal. A goal shows "On track" once it reaches the minimum. Edit goals changes the targets for your whole organization (Reset to defaults restores the starting ones).
  • Add / hide platforms — the dashboard starts with Facebook, Instagram, TikTok, YouTube and LinkedIn. Add your own (for example Google Business or Nextdoor), reorder them, or hide ones you don't use; hiding keeps the past numbers.

Anyone allowed to see the dashboard can read it. Admins and managers can always log weeks and edit goals and platforms; give another role the Social Media: Enter & Edit Data permission (Settings > Landscapt Settings > Roles) to let, say, a marketing coordinator do it without broader access.

Audit trail: per-record tabs and the company-wide log

There are two ways to see who changed what. Most detail panels and dialogs — Clients, Jobs, Invoices, Estimates, Contracts, Packages, Services, Tickets, damage cases, Purchase Orders, Requisitions, Receiving, Projects, Products, Employees, Crews, Schedules (the recurrence definitions behind recurring jobs), and on the Equipt side Assets, Work Orders, PM Schedules, Parts, and Vehicles — have their own Audit Trail tab, showing the history of that one record. The Automation builder has one too; it shows a single history for the whole rule, because changes to its sequences, triggers, and conditions all appear on the automation itself.

For records you don't already have open, the Audits section of the Report Center has three company-wide reports: Audit Log (the full trail, filterable by category, record type, user, and action, with a Record column naming the estimate, invoice, PO, client, contract, project, job, service, package or crew that was changed), Security & Access Audit (permission, user, credential, and approval-chain changes only, defaulting to a 90-day window), and Change Activity by User (a count of changes per person, grouped by record type — useful for spotting an unexpected burst of edits).

Who can read the history. Office users see the change history for the whole company (changes to users, roles, employees and credentials stay limited to admins, managers and the audit-report permissions). Crew logins can't read the change history at all — no Audit Trail tab data and no audit reports — since a shared field login would otherwise see client, invoice and pay changes it has no other access to.

What an entry captures. Every field that changed in a save is recorded — a save that changed both the status and the price shows both. Money is shown in dollars. Some events read as a plain-language decision rather than a list of fields — an approval step reads "Approval step 2 approved by Dana Reyes — 'ok to order'", a change order reads "Change order CO #99 Extra pavers approved — $4500.00" — and appear on the requisition, PO, estimate, or project being approved. Each entry names the person who made the change, not whoever originally created the record (except for the entry that records its creation). Line-item entries on Purchase Orders and Requisitions show the before and after in the entry itself (for example "quantity 4 → 6" or "unit cost $12.50 → $14.00"), changes to a PM schedule's default assignee are recorded, and list-type values are shown as plain text.

What's deliberately hidden. Changes to credentials (API keys, third-party integrations, sign-in connections) are recorded, but the secret values are not — an entry says a credential changed, never what it changed to or from. A user moving between organizations is recorded against the organization they left, not the one they joined, so the move stays visible to the company it happened to.

What's covered. History is kept for the records listed above, and changes to their parts show on the parent record's Audit Trail tab: payments and how they're applied, milestones, a job's services, products and materials, crew member times, chemical applications, contract services, client properties and contacts, employees, roles, discounts, and overhead settings. The Products screen shows receiving and usage history, and project change orders and schedule edits are recorded too. A change to something not covered won't appear in the trail. Entries are written automatically when a record changes — nobody can add, edit or delete an audit entry from the app, so the trail can be relied on as a record of what happened.

Exporting, printing, and scheduled delivery

Every pre-built report and custom analysis offers four output buttons once a result has rows:

  • CSV — a plain spreadsheet file.
  • Excel — an .xlsx workbook.
  • PDF — a formatted PDF of the report.
  • Print — your browser's print dialog; the filter bar and page header are left off so only the table prints.

All three downloads end with a Totals row matching the one on screen (per-group subtotals for grouped reports). If the on-screen result was truncated at 5,000 rows, the export is too — and its totals cover only those rows.

Paper size. PDFs and printouts use US Letter. A report PDF is portrait, and switches to landscape when any section has more than six columns. Ticket printouts are Letter portrait. On a dashboard, the PDF button opens the browser print dialog with the page laid out as shown (charts, KPI tiles and tables, Letter landscape, with the dashboard and tab name as a heading) — choose Save as PDF as the destination.

Scheduled delivery. Reports that can be scheduled — currently the five fixed-window Actual v. Budgeted Hours reports (Today, Yesterday, Week to Date, Last Week, Month to Date) — show a Schedule button on the report page, and the Scheduled tab lists every schedule. A schedule emails the report to one or more recipients once, daily, weekly (on the days you tick) or monthly (a day of the month, or e.g. the last Friday), between an optional start and end date, as a PDF or an Excel file, with an optional custom subject and message. The send time is an hour of the day on your company's clock (Settings > Organization), and times inside the file and the date ranges the report covers use that time zone too. Schedules are checked every hour, and each one goes out on the first check at or after its scheduled hour — so a 7 AM schedule goes out at 7 AM, or at 8 AM if the 7 AM check ran late — and never twice in the same day. Creating a schedule, changing its recipients or turning it back on needs Manage Report Center and permission to view the report itself, because the email goes out without checking the recipient's role. If a scheduled report matches more rows than a report can return at once, the emailed file says it is partial ("only the first N of M rows") and leaves off the totals row.

Scheduling a saved custom analysis. In My Reports, choose Schedule… on a saved analysis (or pick it in New Schedule). Analyses on any dataset can be scheduled, except ones that use joined datasets. Because a saved analysis stores fixed dates, you can add a date window: pick a date column and a rolling range — Yesterday, Last 7 or 30 days (through yesterday), Month to date, This month, Last month, Year to date, This year or Last year — and the range is recalculated on your company's calendar every time it sends. Each send uses the analysis as it is saved at that moment, and checks that the person who created the schedule still has Report Center access and permission for the dataset; if not, or if the analysis was deleted, nothing is sent and the schedule shows the reason in its last-run column (a deleted analysis pauses its schedules).

When the creator is deactivated. Every schedule runs as the person who created it. When that person is deactivated, their schedules are paused right away (the Scheduled tab shows "Paused: the person who created this schedule was deactivated" and "Created by … (deactivated)"), and their own email address is removed from those schedules' recipients. Nothing is sent while it is paused. An Admin can choose Take over & resume from the schedule's menu: the Admin becomes the schedule's owner and it starts sending again. If no recipients are left, the schedule is taken over but stays paused and the editor opens so you can add some first. Other roles see Resume disabled until an Admin takes the schedule over.

Permissions and gating

Who sees which reports and dashboards depends on your plan, on a few dashboards that are specific to one company, and on each person's role:

  • Your plan — the Equipt Dashboard appears only when your plan includes Equipt; Landscapt My Day, the Reports Dashboard, the KPI Scorecard and the Company Report appear only when it includes Landscapt.
  • Advanced Reporting add-on — custom analyses ("My Reports"), Custom Dashboards, the Graphics Library and scheduled delivery need the add-on on Starter and Growth (it's included on Enterprise and during a trial). The built-in Sales Overview, A/R Overview and Operations Dashboard stay viewable on every plan as shipped. This is checked every time one of them opens, runs, saves or sends, not just by hiding tabs.
  • Company-specific dashboards — Financial, Labor Efficiency and Driver Safety Scores are built for one company's own data and don't appear in other accounts, even if someone opens their web address directly.
  • Crew logins — crews don't see the KPI Scorecard, Company Report, Financial or the office dashboards, and opening their web address directly is blocked too. They only see dashboards marked visible to crews (and reports built on jobs and visits return no data to them, because those include prices). A crew login never sees product costs, service rates or anyone's pay or labor cost, and can only query the data behind the visual panels of crew-visible dashboards.
  • Per-dashboard View permissions — each built-in dashboard also has a View … permission in the CRM role editor (View Equipt Dashboard, View My Day, View KPI Scorecard, View Company Report, View Social Media, View Custom Dashboards, View Job Costing, View Estimate Builder, View Calculators and so on). A dashboard a role can't view is hidden from the sidebar and Dashboards home and blocked if someone opens its web address. Admins always see everything.
  • Custom Dashboards need Landscapt — Custom Dashboards are a Landscapt feature. If your plan doesn't include Landscapt, they don't appear on the Dashboards home page and opening one directly is blocked.

The KPI Scorecard is the one reporting page with a view/edit split: View Report Center to open it, Manage Report Center to change targets, manual actuals, or the layout (see the KPI Scorecard section above).

On top of that, CRM role permissions (Settings > Landscapt Settings > Roles, Reports tab) control the Report Center itself, and they are checked every time a report runs, not just by hiding buttons:

  • View Report Center is required for custom analyses, saved reports ("My Reports"), Custom Dashboards, and the Graphics Library. Without it they won't open, run or save, even if a link to them is visible somewhere.
  • Per-report permissions. Most pre-built reports have a permission of the same name in the role editor's CRM Reports, Scheduling Reports, and Accounting Reports sections. A report with no permission of its own is visible to anyone who can reach the Report Center.
  • Per-dataset permissions for your own analyses. A custom analysis or dashboard panel can pull any column of its dataset, so the sensitive datasets also require a matching report permission — otherwise anyone with View Report Center could pull pay rates or invoice history a role was meant to hide. Any one of the listed permissions is enough:
    • Employees — Employee Directory.
    • Timesheets — Job Hours Summary or Employee Directory.
    • Crew Drive Time — Job Hours Summary.
    • Job Visits and Job Services — Job Costing, Job Cost Summary, Cost of Goods Sold Report, or Job Hours Summary.
    • Projects — WIP Schedule — Job Costing or Job Cost Summary.
    • Contracts — Client Contracts, Package Summary Report, or any of the three invoice permissions below.
    • Invoices and Invoice Line Items — Invoiced Income by Client, Invoices with Balances, or A/R Aging Report.
    • Payments — Payment Audit Summary, or any of the three invoice permissions above.
    • Estimates and Estimate Line Items — View Estimates, Estimates by Stage, or Won Estimates by Service.
    • Audit Log — Audit Log or Security & Access Audit.
    Every other dataset (clients, contacts, client timeline, address verification, jobs, services, products, vendors, chemicals, field upsells, tickets, sales-rep month, contract usage) needs only View Report Center. A joined dataset (for example Client fields added to an Invoices analysis) needs its own permission too.
  • Labor cost and pay rates. Even inside a dataset you can query, the labor cost columns (Job Visits labor cost, the WIP Schedule's labor cost) are blank unless you're an admin or your role has Job Costing, Job Cost Summary, Cost of Goods Sold, Show Wage & Labor Burden, or a Profit & Loss report permission. Crew labor rates are only ever used as a crew's average — no report shows one person's rate unless your role can see wages. Outside these reports, the labor cost stored on each job and visit can't be read by any login at all, admins included: for a one-person crew it would reveal that person's pay rate.
  • A dashboard panel the signed-in user can't query is not an error — it shows "You don't have permission to view this panel" and the rest of the dashboard loads normally. Admins aren't limited by CRM role permissions.

Whatever a role is allowed to run, a report only ever returns your own company's data — permissions decide which reports and datasets a person can use, and every result is limited to your organization's records.

© 2026 Landscapt. All rights reserved.