Reporting

Reports Reference

What every report in the Report Center actually measures, its available filters, and the gotchas worth knowing before you trust the numbers — one level deeper than the catalog's one-line description.

This is a reference, not a how-to — for how the Report Center itself works (running a report, saving a custom analysis, building a dashboard), see the Report Center & Dashboards guide. A row marked Full page below opens as its own dedicated report page rather than the generic filter-and-table view every other report uses.
Three rules apply to every report, dashboard, and KPI on this page unless a row says otherwise:
  • Issued-invoice rule. Only issued invoices count — Draft and Void invoices are excluded from every revenue and receivables figure. The single exception is Income Not Invoiced, which exists to list drafts. A client's Account Balance follows the same rule; drafts show separately as the Uninvoiced balance.
  • Cash rule. Payment reports and every "Collected" or "Payments" figure count cash actually received: account credits and AR Write-off entries are excluded, and amounts are net of refunds.
  • Your company's clock, not the viewer's. Every date and time filter (Today, Month to Date, a custom From/To, a single date) uses the time zone set under Settings > Organization (Eastern Time unless you change it). A due/overdue window or a "today" figure follows that time zone, not the time zone of the computer you're viewing from. Hours columns on visit-based reports are man-hours (crew hours × number of men).
  • Break time is excluded from hours. Minutes a crew records with the Pause button are subtracted from a visit's measured duration before it is multiplied by the number of men, so every man-hours, variance, revenue-per-man-hour and labor-cost figure counts worked time only. A one-hour lunch in a nine-hour day with three crew reports 24.00 man-hours, not 27.00. Hours a dispatcher typed in by hand are used exactly as entered. When people are clocked in on a stop, the visit's hours follow their actual punches (each person's own in-to-out minus breaks, added together) rather than crew size × duration. The Timesheet Detail, Job Hours Summary and Crew Hours Summary reports use the same net-of-pause hours; labor cost is reduced by the pause only when pauses are unpaid for your company (the default).

Service Reports

ReportWhat it showsFilters
Visits Report

Shows all visits in any defined time frame with hours, revenue, and location detail.

  • Budgeted Man-Hours and Actual Man-Hours are both duration × number of men.
Scheduled Between, Status, Crew, Service Zip
Backlog Services

Shows scheduled visits that have not been completed as of a cutoff date.

  • Visits still in Scheduled or Dispatched status on or before the cutoff — work waiting to be started.
Scheduled On or Before
Client Count by Service

Shows how many clients receive each service and the share of the client base.

—
Client Services Report

Shows the active services each client is signed up for.

Job Type
Package Summary Report

Shows visit progress and earned vs pending revenue for each service package.

  • Counts visits, not jobs. Total Visits counts every visit on each package job, cancelled included; Completed counts visits in Completed status; Cancelled counts cancelled visits; Remaining is Total − Completed − Cancelled.
  • Earned is completed visits × the per-visit amount — the visit's own rate × qty when set, otherwise the job total split evenly across its non-cancelled visits. Pending is the job total minus Earned. A package job with no visits generated yet shows entirely as Pending.
—
Skipped Visits Report

Shows visits that were skipped in any defined time frame, with the reason.

Scheduled Between
Custom Package Renewal Report

A list of packages with a renewal setting, ready to renew.

—
Over / Under Report

Contract budgeted-to-date vs. invoiced-to-date revenue for each active contract.

  • Budgeted to Date sums the contract's monthly amounts from the start month through today (or the contract end).
  • Over / (Under) is invoiced-to-date minus budgeted-to-date.
  • Invoiced to Date is pre-tax (invoice total − sales tax) and includes contract invoices that were later consolidated or merged into another invoice. Paid to Date is the payments recorded on the contract's own live invoices.
  • A contract that starts mid-month is still credited a full month's budget for that first month.
—
Product and Service Usage

Shows quantity and amount for each service across three stages: Estimate, Job, and Invoice.

  • Amounts exclude sales tax. Job amount is line qty × rate on the job's service lines (the sold template), not per-visit delivery — for a recurring job this is a single snapshot, not a sum across every visit, so it won't reconcile 1:1 against Invoiced Amount.
  • Excludes deleted estimates/jobs/invoices, cancelled jobs, and draft or void invoices.
—
Revenue and Budgeted Hours Projection

Projects budgeted man hours and revenue for the next 12 months from currently scheduled visits.

  • Based on visits currently in Scheduled or Dispatched status from today through the next 365 days (calendar dates in your company's time zone).
  • Budgeted Man-Hours are duration × number of men.
—
Chemical Tracking Report

Post-application compliance record of chemicals actually applied — date, EPA #, quantities, conditions, applicator, and license number.

  • Only chemicals marked as applied (Used) are included — planned applications that were never made are excluded, and so are preloaded chemicals nobody has confirmed yet. Service Date is the date the visit was actually worked when the application is tied to a visit.
  • Applicator Name populates whenever an applicator is assigned to the application. Applicator License Number only populates if that employee had a license on file at the time. Application Start/End Time populate only when entered on the application record, independent of licensing.
  • Chemical Amount is the concentrate used; Solution Amount is the total mixed solution actually applied.
Applied Between
Planned Chemical Usage Report

Chemical quantities needed for upcoming visits (estimated from the Application Rate and property area when nothing is recorded yet) — use to load the truck before the day's chemical jobs.

  • Counts Scheduled, Dispatched and In Progress visits. Uses the visit's saved chemical record when it has one; otherwise the product's default Application Rate x the property's Area field (set under Settings > Chemical Tracking). The product must be attached to the service under Services > Chemicals.
Scheduled Between
Materials Needed for Upcoming JobsFull page

For every product (chemical or general material): quantity needed for outstanding scheduled and waiting-list jobs, amount on hand, amount on order, and the resulting shortfall — with the ability to create a Requisition or PO directly from a shortfall.

  • Chemical quantities require an Area Custom Field under Settings > Chemical Tracking and a default Application Rate on the product. A job service's treated area, or a service's own area measurement (e.g. Parking Lot / Hardscape Sq. Ft.), takes priority over the org-wide field. A chemical with no application rate shows as "not estimated". General materials come from each job's Products section.
  • Chemical demand is the concentrate amount to stock or order, not the raw "applied X per area" rate — when a rate is configured with a diluted/mixed unit (e.g. 1 gallon of finished spray-mix per 1,000 sq ft), the report resolves the rate's dilution settings and the org's unit conversions to back out the concentrate, the same calculation the Daily Load List report uses.
  • Amount on Order sums line-item quantities on open Requisitions (pending approval/approved) and Purchase Orders (requested through partially fulfilled) for that product, less any quantity already received against those PO lines.
  • Demand counts visits in Scheduled, Dispatched, or In Progress status, plus waiting-list jobs that have not been dispatched yet. Only job products still marked Pending count — products already marked Invoiced or Used are excluded, since their quantity has already come out of on-hand.
—
Daily Load ListFull page

What each crew needs to load on the truck for a given day — chemicals (concentrate amount and finished spray-mix volume) and general materials, grouped by crew.

  • Also available from the Dispatch Board: the Load List button next to Stats opens this report for the board's selected day, with Print and a link to the full report.
  • Defaults to the org's current operating day. Chemical amounts use an already-entered application record for that visit when one exists, otherwise fall back to the default Application Rate × the area (the job service's treated area, else the service's own area measurement, else the org's Area Custom Field on the property) — the same estimate Materials Needed uses.
  • Mix volume is the total finished spray solution (e.g. gallons of mix), computed from the product's default rate's dilution settings — it only appears when that rate has a Mixed with Water/Product ratio configured with convertible units.
  • Crew is the visit's crew override if set, otherwise the job's default crew; visits/jobs with no crew assigned appear under Unassigned. A row that can't be reduced to one unit (e.g. stops recorded in different units) says why instead of printing a number.
—
Contract Service Usage

Shows bundled services included on each contract (e.g. 25 mowings) against actual completed visits, so you can see which contracts are running over.

  • Visits used counts a completed visit only if it's linked to a job service matching this bundled service — same logic as the Included Services tab on the contract.
Contract Status, Only show over-included
Field Upsells

Every piece of work a crew flagged from the field, with the client, what they suggested, and whether it became a quote and a sale.

  • Outcome comes from the linked estimate's stage, not the ticket's status — a ticket can be closed without the work ever being quoted.
  • 'Not quoted' means no estimate has been linked to the ticket yet. Use Create estimate on the ticket to make that link in one step.
  • Won Revenue counts only estimates that reached Accepted, Won or Invoiced, so summing it gives money actually sourced from the field rather than open pipeline.
Outcome
Upsell Conversion by Crew Member

Who is spotting work in the field, and how much of it turns into money — suggestions submitted against revenue won.

  • Grouped by the person who submitted the suggestion, so it works whether crews share one login or each member has their own.
  • Leave Outcome empty for the full picture: the row count is everything they submitted, Won Revenue is what came of it. Filter to Won to see only converted suggestions.
  • Won Revenue is the linked estimate's total, so a suggestion that grew into a larger job is credited at what was actually sold.
Outcome

Client

ReportWhat it showsFilters
Client Balance

Shows the clients that owe you and how much.

  • Balance is the client's Account Balance — issued invoices only. Draft invoices are not included; they appear on the Income Not Invoiced report instead.
Where Balance Greater Than ($)
Client Contact List

Shows a client contact list with the ability to sort by account balance and sales rep.

Sales Rep, Sort By
Client Phone List

Shows clients and their phone numbers, filterable by sales rep.

Client Since, Sales Rep
Client Method of Payment

Shows if a client typically pays by check or card.

Client Type, Payment Method
Client Referral

Shows word-of-mouth referrals — who referred each client.

Client Since
New Clients Report

Shows new clients in any defined time frame.

Client Since, Sales Rep
Terminations Report

Shows a list of clients who cancelled service, the date, and reason stated.

Cancelled Between, Reason Contains
Cancellation Count Report

Shows how many cancellations occurred, broken down by reason, source, and sales rep.

Cancelled Between
New Client Count Report

Shows new clients grouped by postal code, source, and sales rep.

Client Since
Clients Report by Completed Visits

Shows which clients were served in any defined time frame — completed visits, revenue, and man-hours per client.

  • Formerly "Clients Report by Completed Jobs." Counts completed visits (a recurring job contributes one row per completed visit), not distinct jobs.
Completed Between
Client Contracts

Shows a single-line summary of all client contracts including billing day and monthly amounts.

  • Monthly columns use the contract's per-month schedule when set, otherwise the flat monthly amount.
Contract Start Between, Active Only
Clients/Leads Monthly Matrix

New clients, new leads, conversion rate, and terminations for the last 3 months.

  • New Leads = accounts created in the month (any current status). Converted = accounts whose Client Since date falls in the month and that are/were clients. Conversion % = Converted ÷ New Leads.
—
Clients and Leads

New leads, converted leads, average days to convert, and cancellations for a date range, plus current totals.

  • New Leads = accounts created in range that are still leads (open or lost). Converted Leads = accounts whose Client Since date falls in range. Avg Days to Convert = created → Client Since, over converted accounts whose Client Since is after their created date (accounts created directly as clients are excluded). Total Clients = active + inactive + cancelled; Total Leads = open leads only.
Date Range
Address Verification

Shows every service address a crew could be sent to and whether Google has confirmed it. Defaults to the ones that still need a look.

Show, Record Type

Revenue

ReportWhat it showsFilters
Invoice Audit Summary

Shows every invoice line item in the period — what was billed, to whom, and for how much.

  • Excludes line items on draft and void invoices.
  • Total is qty × rate; Net is after the line's own discount; Revenue (pre-tax) also takes the invoice-level discount off, spread across the invoice's lines in proportion to their net amounts.
Invoice Date
Payment Audit Summary

Shows payments received per day, broken out by payment method.

  • Cash only: excludes account credits and AR write-offs. Refunds are subtracted on the day they were issued (a refund of an earlier month's payment shows in the month it was refunded). Payments from a client that has since been deleted still count (the client shows as "(deleted)" in custom analyses of payments), so cash-received and P&L totals keep money that was really collected. Custom analyses built on invoices and invoice line items likewise keep a deleted client's billed revenue.
Payment Date
Credit Card Processing Fees

Processing fees collected from clients on card payments — this is company revenue, tracked separately from the invoice amount it was collected alongside.

  • Only card payments carry a fee — ACH payments are always fee-free by design.
  • A fee of $0 on a card payment means the fee was waived or the balance was under the settings threshold.
  • Cash only: excludes account credits and AR write-offs.
  • A refund of a card payment gives back its share of the fee: it shows as a Refund row (negative amounts) on the day it was issued, so the period's fee total is net of refunds.
Payment Date
Invoiced Products Report

Shows invoices that billed one or more products to the client — invoice date and number, product, quantity, price per unit, total, and the invoice's sales rep.

  • Product lines only — lines billed from a product on a job (the product's catalog entry). Service lines and Other Charges are not listed.
  • Excludes line items on draft and void invoices.
  • Total is quantity × price per unit, before any line-level discount. Sales Rep is the rep on the invoice.
Invoice Date, Sales Rep, Product
Revenue by Postal Code

Totals invoiced revenue (pre-tax, after discounts) by billing postal code.

  • Excludes draft and void invoices. Revenue is pre-tax and after discounts (invoice total − sales tax).
Invoice Date
Revenue by Service Summary

Shows invoiced revenue per service line item, broken out by month.

  • Revenue is reported on the invoice date. Draft and void invoices are excluded.
  • Revenue is pre-tax and after discounts: each line net of its own discount, with the invoice-level discount spread across the invoice's lines in proportion to their amounts.
Invoice Date
Daily Production

Shows completed visits with budgeted vs actual hours, man-hours, and revenue.

Completed Between, Crew
Sales Activity Summary

Totals completed-visit revenue and man-hours by sales rep.

Completed Between
Sales Activity Detail

Shows which sales rep sold what service and to whom, with per-visit revenue detail.

Completed Between, Sales Rep
Approved Sales by Sales Rep

Totals sold jobs per sales rep — job count, service, product, and job totals.

  • Based on the job's Date Sold.
Date Sold
Sales by Date Sold (Detail)

Shows each job sold in the period with its services, sales rep, source, and total.

Date Sold, Sales Rep
Invoices and Payments

Compares invoiced revenue to payments collected, month by month.

  • Invoiced reflects the invoice date, excludes draft and void invoices, and includes sales tax so it compares like-for-like with cash collected. Collected reflects the payment date and is cash only — excludes account credits and AR write-offs. Refunds are subtracted on the day they were issued (a refund of an earlier month's payment shows in the month it was refunded).
Date Range
Credit Card Charges

Shows credit card payments received, including processing fees where applicable.

Payment Date
Sales Comparison Chart

Compares invoiced revenue (pre-tax) this year to last year, month by month.

—
Sales Comparison Chart (Paid)

Compares cash collected this year to last year, month by month.

  • Cash only: excludes account credits and AR write-offs. Refunds are subtracted on the day they were issued (a refund of an earlier month's payment shows in the month it was refunded).
—
Avg. Gross Revenue per Year per Client

Trends average invoiced revenue per client, year over year.

—

Schedule Lists

ReportWhat it showsFilters
Employee Directory

Shows employee contact info, employment status, and emergency contacts.

Active Only
Contractor Phone List

Shows contact info for everyone with contractor employment status.

—
Vendor Contact List

Shows vendors and subcontractors with their contact information.

—
Inventory Product List

Shows inventory products with cost, price, and stock levels.

—
Non-Inventory Product List

Shows non-inventory products with cost and price.

—
Call Ahead Required

Scheduled jobs that require a call-ahead reminder before the crew arrives.

—
Service Price List

Shows the service catalog with rates, production rates, and targets.

Active Only
Paused Services

Shows jobs that have been placed on hold.

—
Upcoming Jobs - No Contract

Shows scheduled upcoming jobs that aren't tied to a signed contract.

—

Job Costing

ReportWhat it showsFilters
Job Costing ReportFull page

Shows the material and labor cost of each job with budget vs actual detail.

  • Built per completed visit whose completion date falls in the window. Revenue is the visit's service rate; labor is the crew's clock-out labor cost when one was recorded, otherwise estimated as man-hours × the crew's average labor burden rate and marked with a dagger (†); materials are the job materials logged against the visit.
  • All hours are man-hours (crew hours × number of men).
  • On a stop worked by two crews, revenue is counted once (on the lead crew's visit) while every crew's hours and labor are added in, and the budgeted hours are split evenly between the crews.
—
Cost of Goods Sold ReportFull page

Shows revenue and cost by service in any defined time frame.

  • Built from the same per-completed-visit costing as the Job Costing Report. A visit with several services is split across them by each service's share of the visit's man-hours.
  • Labor marked with a dagger (†) was estimated as man-hours × crew labor burden because no crew clock-out recorded actual labor.
—
Job Cost Summary

Shows completed visits with budgeted vs actual man-hours, revenue, and labor cost per visit.

  • Budgeted and Actual Man-Hours are both duration × number of men.
  • Visits are included by when they were completed (Completed Between, in your company's time zone); a visit marked complete without a completion time is not listed. Worked Date is that completion date in your company's time zone.
Completed Between, Crew
Service Profitability Summary

Shows visit count, revenue, labor cost, and man-hours grouped by service.

  • Visits with multiple services are grouped by the combined service list.
Completed Between
Production Rate Accuracy

Compares each service's assumed production rate (sq ft per man-hour) against what crews actually achieved, to flag rates that need recalibrating.

  • Only includes services set to the 'production rate' budget method — manual-rate services have nothing to compare against.
  • One row per completed visit × service — the filter is on the visit's own status. A recurring job's visits still in progress or not yet done are excluded, even if the job itself is marked complete.
  • Rate Variance is actual vs. assumed, as a percentage. Negative means the job took longer than the assumed rate predicted (the rate may be set too aggressively); positive means it went faster (the rate may be too conservative).
Scheduled Between
WIP Report

Work-in-progress schedule for Projects: percent complete by cost-to-cost, earned revenue, and whether each job is over- or under-billed.

  • % Complete is cost-to-date ÷ EAC (estimated cost at completion) — not the manual progress field on the project.
  • Over/(Under) Billed is billed to date minus earned revenue. Positive means billings are ahead of the work (healthy); negative means the work is ahead of billing (you're financing the job).
  • EAC is seeded from the linked estimate when a job is converted, then re-forecastable on the project — projects with no EAC set show 0% complete.
  • Cost to Date counts purchase orders actually placed (ordered, partly or fully received) — each project line after its share of the PO's discount, tax and shipping — plus direct items and subcontract costs. POs still requested or awaiting approval and open requisitions show under Committed (Not Yet Ordered) instead and don't move % complete; Cost to Date + Committed is the project's total on the Projects list. Billed to Date counts issued (not draft or void) invoices, before tax — including invoices that were later consolidated or merged into another invoice, as long as that invoice is issued.
Status

Financial

ReportWhat it showsFilters
Credit Report

Lists account credits issued in a date range — the client, reference, memo, amount, what has been applied to invoices, and any unapplied balance still on account.

  • Account credits only (payments recorded as a credit) — cash payments, prepayments and AR write-offs are not listed. Date is the credit's date.
  • Applied is the credit amount less its unapplied balance (and any refund); Applied To Invoices lists the invoices the credit was allocated to.
  • Unapplied Balance is what is still on account for this client and will reduce a future invoice.
Credit Date, Unapplied Balance
Invoiced Income by Client

Totals invoiced income per client — subtotal, tax, total, pre-tax revenue (after discounts), and amount paid.

  • Excludes draft and void invoices.
Invoice Date
Invoices with Balances

Shows every open invoice with a balance due and how many days overdue it is.

  • Excludes draft and void invoices — only issued invoices are receivables.
  • Days Overdue counts from the due date, or from the invoice date when the invoice has no due date — the same rule as A/R Aging.
Invoice Date
Pre-Payments

Shows prepayments received, how much has been applied, and what remains.

  • Cash only: excludes account credits and AR write-offs. Applied Amount is net of refunds.
Payment Date
Profit / Loss — Accrual Basis

Income by invoiced line item (accrual basis) less job material and field labor costs.

  • Accrual basis: income is counted on the invoice date regardless of when payment is received. Draft and void invoices are excluded.
  • Income is pre-tax and after discounts: each line's amount net of its own discount, with the invoice-level discount spread across the invoice's lines in proportion to their amounts. Sales tax is not income.
  • Expenses include job material costs and catalog products recorded as used on jobs (by the date they were logged) and field labor costs (by visit completion). Overhead and non-job expenses are not included.
Date Range
Profit / Loss — Cash Basis

Income by payments received (cash basis) less job material and field labor costs.

  • Cash basis: income is counted when payment is received, not when work is invoiced. Cash only: excludes account credits and AR write-offs.
  • Income lines: Payments received (full amount, on the payment date), Refunds issued (on the day each refund was issued), and Credit card processing fees net of the share given back by refunds. A note shows how much of the payments received is still unapplied (prepayments / account credit).
  • Credit card processing fees are the surcharge collected from clients on card payments (never on ACH) — separate from the invoice amount itself.
  • Expenses include job material costs and catalog products recorded as used on jobs (by the date they were logged) and field labor costs (by visit completion). Overhead and non-job expenses are not included.
Date Range
Sales Tax Report

Shows taxable, non-taxable, and collected sales tax totals by month.

  • Tax is reported on invoice date (accrual). Excludes draft and void invoices.
Invoice Date
Financials

Invoiced totals and cash collected for a date range, alongside current receivables aging.

  • Cash collected: payments in the range less refunds issued in the range (each refund on the day it was issued).
Invoice Date

Audits

ReportWhat it showsFilters
Client Timeline Report

Shows every activity on client accounts — notes, calls, emails, invoices, payments, and visits.

Date Range, Activity Type, Client Name
Lead Timeline Report

Shows every activity on lead accounts — notes, calls, emails, and estimates.

Date Range, Activity Type, Lead Name
Income Not Invoiced

Shows draft invoices — revenue already entered on a job but not yet finalized and sent to the client.

  • Draft invoices only, by invoice date. A row drops off once the invoice is printed, sent, or voided. Completed visits that have not had an invoice created at all do not appear here. This is the only report that shows draft invoices — every revenue and receivables report excludes them.
Invoice Date
Visits — Client Has Balance Due

Shows completed and in-progress visits for clients who still have an outstanding balance.

  • Completed and in-progress visits only (by scheduled date); amount is the visit rate × qty before tax.
  • Account Balance is the client's current outstanding balance (issued invoices only), repeated on each of their visits — it is not summed.
Visit Date
Unapplied Payments

Shows payments with money still unapplied to an invoice, including prepayments and credits.

Payment Date
Sales Commission Export

Shows finalized invoices by sales rep for commission calculations, excluding sales tax.

  • Rows appear once an invoice is finalized (not draft or void), regardless of payment status. Amounts exclude sales tax.
Invoice Date, Sales Rep
Audit Log

Every recorded change across Equipt and Landscapt — who changed what, when, and from what value to what.

  • Entries are written by database triggers, not the app, so they cover every path a change can arrive through — the UI, the API, an automation, or an import.
  • The Record column names what was changed, for example an estimate or invoice number, a PO number, a client name or a service name. It is blank for record types that have no friendly name.
  • Changed By reads "system" when the change came from a background job (a contract renewal, a scheduled invoice run) rather than a signed-in person.
Date, Category, Record Type, Changed By, Action
Security & Access Audit

Permission, user, credential, and approval-chain changes only — the review you want before an audit or after someone leaves.

  • Covers user profiles and roles, permission sets, API keys, third-party integrations, OAuth tokens, and approval flows.
  • Secret values (API keys, hashes, tokens) are never recorded — an entry says the credential changed, never what it changed to.
  • A user moving between organizations is recorded against the organization they left, so it stays visible here.
Date (defaults to last 90 days), Changed By
Change Activity by User

How many changes each person made, broken down by record type — useful for spotting an unexpected burst of edits.

Date, Category

Lead

ReportWhat it showsFilters
New Leads Report

Shows new leads received in any defined time frame.

  • Accounts created in the range that started as a lead: still a lead (open or lost), or converted to a client after the day they were created. Accounts created directly as clients are excluded.
Received Between
Lead Aging Summary

Shows how long open leads have been sitting, bucketed by age and source.

—
Closed Leads Summary

Shows leads that were closed without converting, grouped by reason.

  • Leads closed without ever converting to a client (status = Lost). A lost lead is never counted as a client anywhere in reporting.
Closed Between
Company Scorecard

Month-by-month view of new leads, conversions, terminations, and running client totals.

  • New Leads counts accounts created that month, whatever their status is today; totals are as of month end.
  • Client Total = accounts that had converted (Client Since) by month end, are/were clients, and had not been cancelled by then. Lead Total = accounts created by month end that were still a lead at month end (open, converted later, or lost later).
Year
Sales Summary by Source

Shows lead, client, cancellation, and lost-lead counts by source with conversion percentage.

  • Conversion % = accounts that became clients (Clients + Cancelled) ÷ all accounts from the source (Leads + Clients + Cancelled + Lost).
—
Key Performance Indicators (Last 7 Days)

Compares the last 7 days to the 7 days before across leads, clients, estimates, calls, payments, and invoicing.

—

Estimates

ReportWhat it showsFilters
Estimates by Stage

Shows all estimates in the pipeline with their stage, value, probability, and age.

Estimate Date, Stage, Sales Rep
Accepted Estimates by Service

Shows every service line on accepted and invoiced estimates with hours, cost, and value.

  • Excludes declined line items (line status = lost) — e.g. a tier the client unchecked when accepting in the portal.
Estimate Date, Sales Rep
Accepted Estimates by Service (Summary)

Totals accepted and invoiced estimate lines by service — line count, value, hours, and cost.

  • Excludes declined line items (line status = lost).
Estimate Date, Sales Rep
Won Estimates Service Products Report

Shows the products attached to services on accepted and invoiced estimates — estimate value, service, product, quantity, price, and total.

  • Won = accepted or invoiced estimates, dated by the estimate date (the same rule as Accepted Estimates by Service). Lines the client declined (line status = lost) are excluded.
  • One row per product attached to a service line. Estimate Value is the whole estimate's subtotal after discounts and before tax; it repeats on each of the estimate's rows and is not totalled.
  • Product Total is quantity × price for that product as quoted on the estimate.
Estimate Date, Sales Rep, Service, Product
Accepted Estimates — Estimated vs Invoiced Value

Compares each accepted estimate's value against what was actually invoiced and paid.

  • Invoiced and paid values are summed across the issued (not draft or void) invoices linked to each accepted or invoiced estimate. Estimated and Invoiced Value are pre-tax (after discounts); Invoiced Value also counts invoices that were later consolidated or merged into another invoice. Paid is the payments recorded on the estimate's own live invoices.
Estimate Date
Close Ratios by Sales Rep

Shows each sales rep's win rate by estimate count and by dollar value for a date range.

  • Won = accepted or invoiced. Draft estimates were never presented to a client and are excluded from both counts and amounts. An estimate a client declines in the portal moves to Lost and counts against the ratio.
Estimate Date
Sales Activity (Last 7 Days)

Shows estimates created or sent per day over the last 7 days.

—

Job Hours

ReportWhat it showsFilters
Actual v. Budgeted Hours (Today / Yesterday / Week to Date / Last Week / Month to Date)

Five fixed-window variants of the same report: budgeted vs actual hours and revenue for that period's visits, grouped by crew with a subtotal row per crew.

  • Grouped by crew (Assigned Resources), with a subtotal row per crew.
  • Only completed and in-progress visits are included — scheduled, dispatched, cancelled, and skipped visits have no actual hours to compare.
  • Budgeted Hours and Actual Hours are both man-hours (duration × number of men).
  • Hours Variance is Budgeted Hours minus Actual Hours; negative means the visit ran over budget. It is blank until a visit has actual hours.
  • The Revenue / Man Hour chart is total revenue ÷ total man-hours per crew (not an average of per-visit rates).
—
Actual v. Budgeted Hours (Custom Range)

The same report as above, but lets you pick any From/To date range instead of a fixed window — defaults to month to date. The five fixed-window variants can also be scheduled for daily PDF email delivery.

  • Grouped by crew (Assigned Resources), with a subtotal row per crew.
  • Only completed and in-progress visits are included — scheduled, dispatched, cancelled, and skipped visits have no actual hours to compare.
  • Budgeted Hours and Actual Hours are both man-hours (duration × number of men).
  • Hours Variance is Budgeted Hours minus Actual Hours; negative means the visit ran over budget. It is blank until a visit has actual hours.
  • The Revenue / Man Hour chart is total revenue ÷ total man-hours per crew (not an average of per-visit rates).
Visit Date, Crew
Job Hours Summary

Shows total hours worked and labor cost by employee in any defined time frame.

Worked Between
Crew Hours Summary

Shows total hours worked and labor cost by crew in any defined time frame.

Worked Between
Timesheet Detail

Shows individual clock-in/out entries with breaks, hours, and labor cost per employee.

  • These are job punches (clock-in/out on stops), which feed Job Costing. Paid hours for payroll come from the Start Day / End Day shift on the Report Center's Payroll tab instead, so the two can differ by drive and shop time.
  • Labor cost is paid hours × the crew member's labor rate: the burden rate on the crew member record, else the employee's hourly rate plus the company labor burden (the same rate job costing uses). The rate and labor cost are blank for anyone without the Show Wage Burden permission.
Worked Between, Crew
Resource Time Utilization

Breaks down each crew member's day into time on services, drive time, shop/other paid time and unpaid breaks — hours, share of the total, and labor cost for each.

  • Total time is the member's day from Start Day to End Day (the Payroll tab's shift, including office corrections to start/end/break). Payroll-only hour overrides and extra hours are not applied.
  • Time on Services: job punches net of the member's own breaks/lunch and unpaid stop pauses — the hours Job Costing and the Timesheet use, capped at the paid shift.
  • Drive Time: drive recorded by the member's crew that day. Drive is recorded per crew, not per person, so each member working on that crew that day is credited with the crew's full drive time, capped at the shift time not spent on jobs.
  • Shop / Other Paid Time: the rest of the paid shift — shop, loading, unrecorded driving or waiting.
  • Breaks & Lunch (unpaid): unpaid time off the clock inside the day. Paid pauses stay inside Time on Services. Breaks carry no cost.
  • Cost is hours × the crew member's labor rate: the burden rate on the crew member record, else the employee's hourly rate plus the company labor burden — the same rate the Timesheet report and job costing use. Cost is only shown to admins and roles with the Show Wage Burden permission. Days with no Start Day / End Day shift count job punches and recorded drive time only; the report lists how many such days, open shifts and members with no rate it found.
Worked Between, Resource, Crew, Break Down By (day / week / month / quarter / year)
Drive Time Summary

Shows total recorded drive time by crew in any defined time frame — day-level, not billed to clients.

Driving Between
Drive Time Detail

Shows individual drive segments (start/end and duration) recorded by each crew.

Driving Between, Crew

Receivables

ReportWhat it showsFilters
A/R Aging Report

Buckets each client's open invoice balances by how many days past due they are.

  • Reflects invoices open today — not a point-in-time snapshot.
  • Excludes draft and void invoices — only issued invoices are receivables.
  • Days past due count from the due date, or from the invoice date when the invoice has no due date. The same rule drives Invoices with Balances, Financials, the Company Report, the KPI scorecard, the home Overdue AR card, and the Invoices list's Past Due tab.
—
A/R Aging Snapshot

Shows each client's outstanding balance alongside their most recent invoice and payment.

  • Outstanding balance and Last Invoice exclude draft and void invoices. Last Payment is cash only — excludes account credits and AR write-offs.
Where Balance Greater Than ($)
StatementsFull page

Generate and email running-balance account statements for clients with an outstanding balance — a date range, an optional message, and a bulk send.

—

Tickets

ReportWhat it showsFilters
My Past Due Tickets

Shows open tickets whose due date has already passed.

—

Forms

ReportWhat it showsFilters
Forms Summary

Shows forms and the number of responses received in any given time frame.

  • Responses marked Spam or Ignored are not counted. Date bounds are calendar days in your company's time zone.
Responses Between
© 2026 Landscapt. All rights reserved.